Használati útmutató Auray WSB-1S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Auray WSB-1S (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/4
Carry Bag
for Wireless System
WSB-1S
Fits single wireless
microphone system
Foam cutouts for receiver,
transmitter, and
handheld microphone
Front access to receiver
controls
Compartment for carrying
lavalier mics, batteries,
and accessories
Back zippered opening for
cabling
Inserting a Receiver
Remove the spacers
adhesive cover and press
the spacer onto the bottom
of your receiver.
Fold down the
touch-connect straps over
the top of the receiver.
Insert the receiver into the
slot.
Push the straps through
the strap tie-down holes,
pull them until tight, and
press them down onto the
touch-connect strip.
1
3 4
2
Antennas and Power Cables
Use the back compartment
to attach antennas.
Unzip the back opening to
connect power and
microphone cables.
Remove the spacer cube if
additional space is needed
in the accessory
compartment or for a long
transmitter antenna.
Fold back the top ap and
attach it to the
touch-connect strips on
the back of the case for
access to controls, cabling,
and antennas.
1
3 4
2

Termékspecifikációk

Márka: Auray
Kategória: nincs kategorizálva
Modell: WSB-1S

Szüksége van segítségre?

Ha segítségre van szüksége Auray WSB-1S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek