Használati útmutató Aurora AS800CD
Aurora
Papír aprító
AS800CD
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Aurora AS800CD (2 oldal) a Papír aprító kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/2
Problem 2 The shredder will not stop working –
The shredder is designed to operate for a couple of seconds after paper has cleared the
machine this is normal and helps clear paper through the cutting heads. –
If the shredder continues to work after a shredding cycle and does not stop then this is
either;
1. The waste bin is full. You should empty the b or compact the shredded paper. in
2. Some paper is blocking the auto sensor, try clearing it by reversing and then returning
the switch to auto or by shredding some more paper.
3. Glue from envelopes or label’s is making the sensor lever stick. You should not shred
gummed envelopes or sticky labels, try cleaning and lubricating the shredder with Aurora
SP1000 Lubrication and sharpening sheets, see above.
Problem 3 The shredder has jammed whilst shredding –
Empty the waste bin and try reversing the unit to clear the jam.
If this does not work disconnect power, trim off paper above and below the jam,
reconnect power and try alternating between reverse and auto until the jam clears.
If at any point the shredder stops working during this process it has probably over heated
and will need to cool down for 60 minutes.
Please be careful not to exceed the maximum paper capacity and feed the paper in
straight, please be aware damage caused to the shredder by inserting too much paper or
by failing to shred using a straight paper path is classed as misuse and invalidates your
warranty.
Never attempt to clear paper jams by inserting implements into the shredder or by
opening the unit.
Warranty
Your Aurora shredder comes with a 12 months return to base warranty, please contact
your supplier for further details.
Aurora warrants all parts of the machine to be free from defects in materials and
workmanship for a period of 1 year from the date of the purchase by the original
consumer. If the shredder is found to be defective during the warranty period the sole
and exclusive remedy will be the repair or replacement at Aurora’s option and expense.
Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential
damages attributable to the product. The liability of Aurora Electronics (UK) Ltd is limited
to the cost of the repair/replacement of the unit under warranty.
The warranty shall be immediately invalidated if unauthorized repairs or modifications are
made, if the machine has been abused or mishandled, if the product has been re-sold, or
if the product has not been operated in accordance with the instructions contained in this
document.
The warranty is in addition to and does not diminish the consumer’s statutory or legal
rights.
Aurora Electronics (UK) Ltd
Email: sales@aurora-ltd.co.uk
www.aurora-ltd.co.uk
IMPORTANT
Please ensure the shredder head is placed on the bin correctly. The safety cut out will prevent the
shredder from operating if the bin is the wrong way around or is not placed correctly on the waste bin.
Ensure the viewing window of the waste bin faces forward and the shredder head is placed on the bin
as shown in figure 1.
The safety cut out is on the back of the shredder, the semi circular recess on the waste bin must slot
inside the semicircular shape on the back of the shredder head to deactivate the safety cut out.
Please ensure the semicircular recess on the bin is not outside the shredder head or that the shredder
head is not resting on top of the semicircular recess on the bin. When correctly fitted there should be
no gap between the shredder head and the waste bin, and the fitting should be flush all around the
shredder.
Termékspecifikációk
| Márka: | Aurora |
| Kategória: | Papír aprító |
| Modell: | AS800CD |
Szüksége van segítségre?
Ha segítségre van szüksége Aurora AS800CD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Papír aprító Aurora
18 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
Útmutatók Papír aprító
- Papír aprító Renkforce
- Papír aprító Anova
- Papír aprító Swordfish
- Papír aprító Camry
- Papír aprító Genie
- Papír aprító Tracer
- Papír aprító Nedis
- Papír aprító Kobra
- Papír aprító Qoltec
- Papír aprító D-Mail
- Papír aprító Olympia
- Papír aprító Lervia
- Papír aprító Leitz
- Papír aprító Duronic
- Papír aprító Acco-Rexel
Legújabb útmutatók Papír aprító
3 Április 2025
12 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
11 Január 2025
11 Január 2025
5 Január 2025
5 Január 2025
5 Január 2025