Használati útmutató AXESS AXDIS-GMLN44

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXDIS-GMLN44 (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.6 csillagra

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

AXDIS-GMLN44

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 5/4/20 INSTAXDIS-GMLN44

INTERFACE FEATURES

INTERFACE COMPONENTS

TABLE OF CONTENTS

Connections to be made ...................................3-6

- For models

without

an amplifier .......................3

- For models

with

an analog amplifier ................4

- For models

with

a digital amplifier ...................5

- 3.5mm jack steering wheel control retention ..6

Installing the AXDIS-GMLN44 ................................6

Programming the AXDIS-GMLN44 ........................7

Adjusting the AXDIS-GMLN44 ...............................7

Steering wheel control settings ......................8-10

- L.E.D. feedback ....................................................8

- Changing radio type ...........................................8

- Remapping the steering wheel control buttons ..9

- Dual assignment instructions

(long button press) ............................................10

Troubleshooting ....................................................11

GM Data Interface with SWC2012-2016

• Provides accessory power

(12-volt 10-amp)

• Retains R.A.P. (retained

accessory power)

• Provides NAV outputs (parking

brake, reverse, speed sense)

• Retains chimes

• Retains audio controls on the

steering wheel

• Retains OnStar / OE Bluetooth

• Adjustable OnStar level

• Retains the factory AUX-IN jack

•

Can be used in non-amplified, or

analog/digital amplified models

• Retains balance and fade

(excluding digital amplified

models)

• Micro “B” USB updatable

• AXDIS-GMLN44 interface • AXDIS-GMLN44 harness

• 16-pin harness with stripped leads • 4-pin to 4-pin resistor pad harness

• Female 3.5mm connector with stripped leads

APPLICATIONS

See inside front cover

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape • Connectors (example: butt-connectors, bell caps, etc.) • Small flat-blade screwdriver

Termékspecifikációk