Használati útmutató AXESS AXDIS-TY3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXDIS-TY3 (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 21 ember találta hasznosnak.

/ 24 PDF

AXDIS-TY3

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 6/12/24 INSTAXDIS-TY3

INTERFACE FEATURES

TOOLS REQUIRED

Toyota Interface with SWC 2018-2021

APPLICATIONS

• Designed for both amplified and non-amplified models

• Provides accessory power (12-volt 10-amp)

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains the factory AUX-IN jack

• Retains the factory backup camera

• Includes an AXCSD-6V 12-to-6V step-down for the factory camera

• Retains audio controls on the steering wheel

• Retains balance on amplified models

(non-amplifed models retain balance and fade)

• Micro-B USB updatable

TOYOTA

4Runner .......................2020-Up

Avalon ..........................2019-Up

C-HR .............................2019-Up

Camry...........................2018-Up

Corolla ..........................2019-Up

Highlander ...................2020-Up

RAV4 ............................2019-Up

Sequoia ........................2020-Up

Sienna ..........................2018-Up

Tacoma ........................2020-Up

Tundra .........................2020-2021

INTERFACE COMPONENTS

• AXDIS-TY3 interface • AXDIS-TY3 harness (LD-TYAMP3-SWC)

• Female 3.5mm connector with stripped leads

• AXCSD-6V

TABLE OF CONTENTS

Connections:

LD-TYAMP3-SWC ....................................................2

3.5mm Jack Steering Wheel Control Retention

...3

Installing the AXDIS-TY3........................................3

Programming the AXDIS-TY3 ...............................4

Audio Level Adjustment .......................................4

Steering Wheel Control Settings ......................5-8

LED Feedback .......................................................5

Changing Radio Type ..........................................6

Remapping the SWC Buttons .............................7

Dual Assignment Instructions

.............................8

Troubleshooting.....................................................9

Product Info

Visit AxxessInterfaces.com for more detailed information

about the product and up-to-date vehicle specific applications.

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Small flat-blade screwdriver

• Tape

• Wire cutter

• Zip ties

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this product.

Ensure that all installation connections, especially the air

bag indicator lights, are plugged in before reconnecting the

battery or cycling the ignition to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Termékspecifikációk