Használati útmutató AXESS AXDSPL-CH8

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXDSPL-CH8 (16 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 21 ember találta hasznosnak.

AXDSPL-CH8

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 7/24/24 INSTAXDSPL-CH8

INTERFACE FEATURES

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip-ties • Multimeter

TABLE OF CONTENTS

Installation & Installation Options

........................2

Connections ........................................................3-4

Rebooting the U-Connect Radio ..........................5

Mobile App: Quick Setup ...................................6-7

Specifications .........................................................8

•Includes a DSP (Digital Signal Processor)

•Selectable 15 Band graphic EQ or 5 Band Parametric EQ

•4 inputs and 6 individually assignable outputs

•Independent equalization for front, rear, and sub

•Selectable low pass, band pass, and high pass filters

•Selectable crossover slopes; 12db, 24db, 36db, 48db

•Each channel can be delayed independently up to 10ms

•Clipping detection and limiting circuits

•Designed for both amplified and non-amplified models

•Easy behind the radio installation with pre-wired harness

(Features continued on next page)

APPLICATIONS

VisitAxxessInterfaces.com for current application list

INTERFACE COMPONENTS

• AXDSPL-CH8 interface

• AXDSPL-CH8 interface harness

• AXDSPL-CH8 vehicle T-harness

• Bass knob

Chrysler DSP Interface (with Pre-Wired Harness)

2020-Up

www.MetraOnline.com

MetraOnline.com may be used to assist

with dash assembly instructions. Simply

enter your Year, Make, Model vehicle

into the vehicle fit guide and look for the

Dash Kit Installation Instructions.

Google Play Store

Apple App Store

iOS 12.1 or higher

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this

product. Ensure that all installation connections,

especially the air bag indicator lights, are plugged in

before reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Termékspecifikációk