Használati útmutató Azden 1201URX/SI-S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Azden 1201URX/SI-S (8 oldal) a mikrofon kategóriában. Ezt az útmutatót 23 ember találta hasznosnak.

/ 8 PDF

User’s Guide

1201URX/AB • 1201URX/VM • 1201URX/Si/Si-S

1201BT • 1201XT

ENHANCED BROADCAST PERFORMANCE

UHF WIRELESS SYSTEM

1201URX/AB - 1201URX/Si - 1201URX/VM/Si-S

RF Carrier Frequency Range 188 steps ~ 638.125 - 661.875 MHz

MicroComputer Controlled PLL Synth.

Noise Reduction Expander (THAT)

Effective Operating Range 200 - 300 ft ~ 60 - 100m

Frequency Response 50 - 15kHz (± 1.5dB)

RF Sensitivity (12dB SINAD) 1.2μV

Adjacent Channel Selectivity > 70dB (± 250kHz)

Image Rejection > 93dB

IF Rejection > 93dB

Audio THD < 0.8%

Audio Output 40dBm ± 40kHz Deviation (-20dBm ± 40kHz Deviation for 1201URX\Si)

Output Impedance 600Ω (300Ω for 1201URX\Si)

Signal/Noise Ratio > 62dB (± 5kHz Deviation) “A” Weighted

Power Requirements 11 - 15V DC @ 220mA (10 - 17V DC @ 200mA for 1201URX\Si)

Dimensions 68W x 84H x 18D mm- 1201URX/Si insertion

93W x 119H x 49D mm - 1201URX/AB

82W x 150H x 60D mm - 1201URX/VM

Operating Temperature Range -500 - +1220 F ~ -100 - +500 C

Weight 8.8 ounces ~ 250g for 1201URX/Si

15.87ounces ~ 450g for 1201URX/AB

26.45ounces ~ 750g for 1201URX/VM

1201BT

Output Power 30mW

Max Modulation Sensitivity -4dBm

MIC Level / Imped. -56dBm (± 5kHz Deviation)

Power Requirements 3V DC (2 “AA” Alkaline) @ < 150mA

Dimensions 2.48 (W) x 3.86 (H) x 1.12 (D) inches

63 (W) x 98 (H) x 28.5 (D) mm

Weight w/Battery 6.35 ounces ~ 180g

1201XT

Output Power 30mW

Max Modulation Sensitivity +20dBM ~ 0dBm

MIC Level / Imped. (Dynamic) -60dBm / 2.2kΩ (± 5kHz Dev.)

Phantom Power 48V ±2V @ 2mA

Power Requirements 3V DC (2 “AA” Alkaline) @ < 180mA - 290 mA w/Phantom Power ON

Dimensions 1.57 (W) x 4.49 (H) x 1.57 (D) inches

40 (W) x 114 (H) x 40 (D) mm

Weight w/Battery 6.35 ounces ~ 180g

Due to constant improvements, specications are subject to change without notice.

Licensing

Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license depends largely on the user’s classication, applica-

tion and frequency. Contact the appropriate agency (FCC in the USA) for further information.

SPECIFICATIONS

Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010

tel - 516.328.7500 • fax - 516.328.7506 • email - sales@azdencorp.com

© 2010 Azden Corporation Printed in USA P1030-02

Termékspecifikációk