Használati útmutató Bauknecht BCIF 5O41 PLEGTS

Bauknecht mosogatógép BCIF 5O41 PLEGTS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bauknecht BCIF 5O41 PLEGTS (13 oldal) a mosogatógép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/13

THANK YOU FOR PURCHASING A BAUKNECHT PRODUCT.

To receive more comprehensive help and support, please register your product at:

www.bauknecht.eu/register

1 2 3 4 5 6 7 8 9 10

1. Upper rack

2. Cutlery rack

3. Foldable aps

4. Upper rack height adjuster

5. Upper sprayer arm

6. Power Clean support

7. Lower rack

8. Lower sprayer arm

9. Filter Assembly

10. Salt reservoir

11. Detergent and Rinse Aid dispensers

12. Rating plate

13. Control panel

1. ON-OFF button

2. CYCLES 6 buttons for direct access popular cycles

3. EXTRA CYCLES button. Access to other cycles

4. INFO button. Provide info for selected cycle

5. DISPLAY - Indicators area

6. DISPLAY - Information area

7. PREVIOUS button for options/settings

8. OK button. Select/change options and settings

9. NEXT button for options/settings

10. START button

PRODUCT DESCRIPTION

Before using the appliance carefully read Safety Instructions guide.

The control panel of this dishwasher activates pushing by ON/OFF button.

For energy saving the control panel deactivates automatically after 10 minutes if no cycle has started.

CONTROL PANEL

DISPLAY - Indicators

A. START DELAY

B. ECO CYCLE

C. MULTIZONE - Cutlery rack

D. CLOSED WATER TAP

E. ADD SALT

F. MULTIZONE - Upper Rack

G. MULTIZONE - Lower Rack

H. ADD RINSE AID

I. TABLET

A B C

I H G F

0000 000 00000

Service:

After connecting the appliance to the power supply for the rst time,

the display will guide you to set up the appliance for rst use.

1. The language selection

To select preferred language please

press button „<” or „>”.

Conrm by pressing „OK” button.

After language conrmation, the appliance will go through the rst time

use conguration menu.

2. Setting the water hardness

The water hardness is by default set

to level 3. To change water hardness

evel press button „<” or „>” repeatedly.

To conrm your choice press „OK”

button. The level must be set

according to the table below.

To allow the water softener to work

in a perfect way, it is essential that the water hardness setting is based

on the actual water hardness in your house. This information can be

obtained from your local water supplier.

3. Filling the water softener

When water hardness is set, it is

required to ll water softener with

water and special regeneration salt.

Remove the lower rack and unscrew

the reservoir cap (anticlockwise)

As a rst step it is needed to ll

reservoir with water ( ~1.5 litres).

Once done, proceed to the next

step by pressing „OK” button.

Position the funnel (see gure) and ll the salt reservoir right up to its

edge (approximately 1 kg); it is not unusual for some water will spill out.

Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Once done, proceed to the next step by pressing „OK” button.

Only use salt that has been specically designed for dishwashers.

4. Setting the brightness level

The brightness level is by default set

to level 5. To change brightness level

press button „<” or „>” repeatedly.

To conrm Your choice press „OK”

button.

5. Detergent type operation

In this step it is very important to

choose what type of detergent will

be used (tablet/capsule or

gel/powder).

If you prefer to use All-in-one

detergent in tablet or capsule for

washing - press „OK”, then go to

step on the 7. Open tap operation

next page.

The symbol on display will be lit. If you prefer to use gel or

powder detergent for washing, press „<” or „>”, then go to step 6.

Rinse aid operation.

6. Rinse aid operation*

*If All-in-one detergent was chosen in the previous step, this step will

be skipped by the appliance.

LANGUAGE: ENGLISH?

<> = CHANGE OK = YES

ENGLISH

SELECTED

WATER HARDNESS = 3

<> = CHANGE OK = YES

WATER HARDNESS

(1=MIN, 5=MAX)

Water Hardness Table

Level °dH

German degrees

°fH

French degrees

°Clark

English degrees

1 Soft 0 - 6 0 - 10 0 - 7

2 Medium 7 - 11 11 - 20 8 - 14

3 Average 12 - 16 21 - 29 15 - 20

4 Hard 17 - 34 30 - 60 21 - 42

5 Very hard 35 - 50 61 - 90 43 - 62

POUR WATER

OPERATION

INSERT 1,5 LITER OF

OK = DONE

WATER IN THE

OK = DONE

WATER SOFTENER

OK = DONE

INSERT SALT

OPERATION

ADD 1KG OF SALT

OK = DONE

IN THE SALT DISPENSER

OK = DONE

ADJUST BRIGHTNESS

(1=MIN, 5=MAX)

BRIGHTNESS = 5

<> = CHANGE OK = YES

DETERGENT TYPE

OPERATION

DO YOU USE

<> = NO OK = YES

DETERGENT?

<> = NO OK = YES

“ALL IN ONE”

<> = NO OK = YES

RINSE AID

OPERATION

INSERT RINSE AID

OK = DONE

IN THE DISPENSER

OK = DONE

FIRST TIME USE

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

Residual saline solution or grains of salt can lead to corrosion,

irreparably damaging the stainless steel components.

The guarantee is not applicable if faults are caused by such

circumstances.

If the salt container is not lled, the water softener and the heating

element may be damaged as a result of limescale accumulation.

Using of Salt is recommended with any type of dishwasher detergent.

1. Open the dispenser by pressing and pulling up the tab on the lid.B

2. Carefully introduce the rinse aid as far as the maximum (110 ml) re-

ference notch of the lling space - avoid spilling it. If this happens, A

clean the spill immediately with a dry cloth.

3. Press the lid down until you hear a click to close it.

4. Conrm operation by pressing „OK” button.

NEVER pour the rinse aid directly into the tub.

Setting rinse aid level

(not necessary when using tablets/capsules)

The rinse aid dosage can be adjusted to the detergent used. The lower

the setting, the less rinse aid is dispensed. The factory setting is for (5)

level.

To change, follow instructions in section “SETTINGS / MENU”.

7. Open tap operation

Check water tap is open. If closed, open it then conrm by pressing

„OK” button.

8. First cycle operation

Before normal use of appliance it is

recommended to run Intensive cyc-

le rst, to calibrate the appliance.

Insert a detergent into dispenser

chamber (see below), then press D

„OK” button.

Intensive cycle will be selected

automaticly. Press „START”

button and close the appliance

door within 4 sec.

This rst cycle can be up to 20

minutes longer as a result of the

automatic calibration process.

After this process the appliance is ready for normal use.

OPEN TAP

OPERATION

OPEN THE

OK = DONE

WATER TAP

OK = DONE

FIRST CYCLE

OPERATION

REMEMBER TO RUN THE

OK = EXIT

INTENSIVE CYCLE

OK = EXIT

WITH EMPTY BASKETS

OK = EXIT

TO COMPLETE

OK = EXIT

THE FIRST SET UP

OK = EXIT

ADDING A DETERGENT

To achieve the best washing and drying results, the combined use of

detergent, rinse aid liquid and rened salt is required.

We recommend using detergents that do not contain phosphates or

chlorine, as these products are harmful to the environment.

Good washing results also depend on the correct amount of deter-

gent being used.

Exceeding the stated amount does not result in a more eective wash

and increases environmental pollution.

The amount can be adjusted to the soil level. In the case of normally

soiled items, use approximately either 35g (powder detergent) or

35ml (liquid detergent) and additional tea spoon of detergent directly

inside the tub. If tablets are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed with water

before being placed in the dishwasher, reduce the amount of deter-

gent used accordingly (minimum 25 g/ml) e.g. skip the powder/gel

putted inside the tub.

To open the detergent dispenser,

press button . Introduce the deter-C

gent into the dry dispenser only. D

Place the amount of detergent for

pre-washing directly inside the tub.

1. When measuring out the detergent

refer to the mentioned earlier infor-

mation to add the proper quantity.

Inside the dispenser there are D

indications to help the detergent

dosing.

2. Remove detergent residues from the edges of the dispenser and

close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until the

closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the program.

If you are using a All-in-one detergents, we recommend that you add

salt in any case, especially if the water is hard or very hard (follow the

instructions given on the packaging).

Usage of detergent not designed for dishwashers may cause

malfunction or damage to the appliance.

Termékspecifikációk

Márka:	Bauknecht
Kategória:	mosogatógép
Modell:	BCIF 5O41 PLEGTS

Szüksége van segítségre?

Ha segítségre van szüksége Bauknecht BCIF 5O41 PLEGTS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók mosogatógép Bauknecht

Bauknecht GSF SYMPHONY ACTIV Útmutató

5 Április 2025

Bauknecht BKSV1 UAN Útmutató

22 Március 2025

Bauknecht GSF 4741 Útmutató

19 Március 2025

Bauknecht gsx 7558 Útmutató

16 Január 2025

Bauknecht GSX 5999 G Útmutató

16 Január 2025

Bauknecht GSF 4055 WS Útmutató

16 Január 2025

Bauknecht GSX 5961-1 Útmutató

16 Január 2025

Bauknecht gsi 6497 in sw ws Útmutató

16 Január 2025

Bauknecht GSF 5476 TW-WS Útmutató

15 Január 2025

Bauknecht gsi 4743 5 Útmutató

15 Január 2025

Útmutatók mosogatógép

Legújabb útmutatók mosogatógép

Miele G 4485 Útmutató

10 Április 2025

Miele G 4940 SC Front Jubilee Útmutató

10 Április 2025

AEG Favorit R 3Prog Útmutató

9 Április 2025

Miele G 5432 SCU Útmutató

9 Április 2025

Miele G 5495 SCVi XXL Active Plus Útmutató

9 Április 2025

Oranier GAVI 7592 XL Útmutató

9 Április 2025

Amica DIM44D6EBq Útmutató

9 Április 2025

Sharp QW-I1GI47EX Útmutató

9 Április 2025

Beko BDFN26450XC Útmutató

8 Április 2025

Asko DFI544B Útmutató

8 Április 2025