Használati útmutató BDI Format 6307

BDI szekrény Format 6307

Olvassa el alább 📖 a magyar nyelvű használati útmutatót BDI Format 6307 (2 oldal) a szekrény kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/2
1
C - 5/32" x 12mm
Phillips Screw
x 20
E - Center Caster x 1
I - Letter File Bar x 2
D - Brake Caster x 4
B - Cabinet x 1
F - M4 x 37mm
Phillips Screw
x 2
G - M4 x 25mm
Phillips Screw
x 2
H - Pull x 2
FORMAT
6307
Format is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Do not use power tools for assembly of this product.
Placement and Maintenance
Format™ Office furniture is designed for indoor use on level floors.
Clean steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some
components are shipped inside the cabinet. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at customerservice@bdiusa.com. For all other concerns, please
contact your BDI Retailer.
Step 2
Install Casters
Carefully position Cabinet (B) on its back side so that bottom side
is accessible, then attach a Caster at each of the five (5) exposed
installation plates using 5/32" x 12mm Phillips Screw (C) and a
Phillips Screwdriver.
Component List
Designed by Matthew Weatherly.
These distinctive product con gurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI and Format are trademarks of Becker Designed, Inc.
All Rights reserved. ©2012, BDI
Made in Taiwan. 6307REV022312v1
A - Phillips Screwdriver
x 1 (not provided)
C x 4
E x 1
C x 16
D x 4
ASSEMBLY INSTRUCTIONS
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM

Termékspecifikációk

Márka: BDI
Kategória: szekrény
Modell: Format 6307

Szüksége van segítségre?

Ha segítségre van szüksége BDI Format 6307, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek