Használati útmutató Behringer BEQ700

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Behringer BEQ700 (22 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/22
Thank you for showing your condence in us by purchasing the
BehringerBASS GRAPHIC EQUALIZER BEQ700. This ultimate eects pedal
is specically designed to match the frequency range of bass guitars.
Itallows 7-band sound shaping and feedback elimination from 50 Hz to
10kHz. It has a powerful 15 dB boost/cut per band, ideally suited even for
5-string and 6-string bass guitars.
1. Controls
(1) The
7-band EQ
faders allow boosting/cutting single frequency
ranges from 50 Hz to 10 kHz at ±15 dB.
(2) The LEVEL fader adjusts the output level. It can be used to achieve
eective volume “boost” or “cut.”
(3) This LED illuminates when the EQ is activated. It also serves as a
battery level indicator.
(4) Use the footswitch to activate/deactivate the EQ.
(5) Use this ¼" TS connector to plug in the instrument cable.IN
(6) The ¼" TS connector sends the signal to your amp.OUT
Use the connection at the front of the unit to plug in a 9 V power DC IN
supply (not included).
The is located underneath the pedal cover. BATTERY COMPARTMENT
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
The BEQ700 has no on/o switch. As soon as you insert the
jack into the in connector, the BEQ700 begins running.
When not using the BEQ700, remove the jack from the
in connector. This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
V 1.0
BASS GRAPHIC EQUALIZER BEQ700
Ultimate 7-Band Graphic Equalizer
(2)
(6)
(1) (3)
(5)
(4)

Termékspecifikációk

Márka: Behringer
Kategória: nincs kategorizálva
Modell: BEQ700

Szüksége van segítségre?

Ha segítségre van szüksége Behringer BEQ700, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek