Használati útmutató Behringer TO100

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Behringer TO100 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 9.5 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/2
Authentic Tube-Sound Overdrive Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER TUBE OVERDRIVE TO100.
This high-quality eects pedal is ideally suited for giving electric guitars maximum exibility with
state-of-the-art overdrive sounds that capture every nuance of your playing—from smooth overdrive
to screaming tube sounds. Thanks to its high-performance features you get tube-like distortion,
smooth sustain and super fat tone.
1. Controls
(1) The control adjusts the intensity of the overdrive eect. DRIVE
(2) The control adjusts the output level.LEVEL
(3) The control allows you to shape your overall sound. TONE
(4) The LED illuminates when the eect is activated. It also serves as a ON/BATT
battery level indicator.
(5) Use the footswitch to activate/deactivate the eect.
(6) Use this ¼" TS connector to plug in the instrument cable.IN
(7) The ¼" TS connector sends the signal to your amp. OUT
Use the connection to plug in a 9 V power supply (not included). DC IN
The is located underneath the pedal cover. To install or replace the 9 V battery BATTERY COMPARTMENT
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
The TO100 has no on/o switch. As soon as you insert the jack into the in connector,
the TO100 begins running. When not using the TO100, remove the jack from the in
connector. This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
(1)
(7)
(3)
(2)
(4)
(5)
(6)
TUBE OVERDRIVE TO100

Termékspecifikációk

Márka: Behringer
Kategória: nincs kategorizálva
Modell: TO100

Szüksége van segítségre?

Ha segítségre van szüksége Behringer TO100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek