Használati útmutató Beltronics GT-360

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Beltronics GT-360 (10 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 21 ember találta hasznosnak.

Programming

Press BRT to go from Press VOLUME + or – to change

one category to the next your setting within a category

User Mode Advanced*Access and customize all Settings and Preferences

NoviceAccess and customize units and display color, (all other

Settings are set to factory defaults)

NOTE: Switch back to Advance mode to view all Preferences

Pilot Scan Bar*Scanning Bar with Full Word

Full WordFull Word: AutoScan, Auto NoX, or Highway

Display Color Copper*/Blue/Green/RedSet color to match your vehicle’s dash display

Speed Display On*Displays current speed

ODisplays battery voltage

Cruise Alert O / 20-160 mphOers double beep alert tones below specied speed

20 mph*

Over Speed O / 20-160 mphReminds you when you exceed a specied speed

70 mph*

Meter Mode Standard*Single band with front and rear signal strength bar graphs

TechSingle band with numeric frequency and front and rear

signal strength bar graphs

BasicSimple messages replace bands:

Caution (if traveling below cruise alert limit)

Slow Down (if traveling above cruise alert limit)

Tones Standard*Standard Beltronics alert tones

MildMild doorbell chime alert tones

AutoMute Low/Med*/High/O

Automatically reduces audio to preferred volume during alert

AutoLock On* / OAutomatically stores and locks out false alarms

Units English*/MetricUnits for distance and speed

Language English*/EspanolLanguage for voice and text

Voice On* / OVoice announcements

GPS Filter On* / OEnables GPS-powered features

Press and hold the BRT and SEN buttons to access Programming. To exit Programming, simply wait a few

seconds without pressing a button. The unit will display Completed to conrm your selections.

7

Termékspecifikációk