Használati útmutató Bertazzoni PROHK30PI

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bertazzoni PROHK30PI (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.2 csillagra

Oldal 1/1
A x4
B x4
C x1
A
B
C
HANDLE INSTALLATION ON CUSTOM CABINETS
In case a custom cabinet panel is to be mounted on any of the models listed below with Bertazzoni handles,it will be necessary to install brass tapping inserts in order to
secure the handle properly on the custom panel.
SUGGESTED HANDLE INSERT FOR PANELS - M5 x 0.8 MM BRASS TAPPING INSERTS
Recommended drill bit size to drill the pilot hole is 3/8"
Suitable inserts can be ordered at www.encompassparts.com
Part Number: 95631A100, contains n°4 M5 brass hardwood inserts and 1 M5 installation bit
Do not use a power tool to mount the inserts. Installation of the inserts with improperly calibrated power tools risk damaging the panels.
3070992-revA

Termékspecifikációk

Márka: Bertazzoni
Kategória: nincs kategorizálva
Modell: PROHK30PI

Szüksége van segítségre?

Ha segítségre van szüksége Bertazzoni PROHK30PI, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek