Használati útmutató Black & Decker BDCMTR-XE
Black & Decker
router
BDCMTR-XE
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Black & Decker BDCMTR-XE (8 oldal) a router kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/8

Australia
New Zealand
www.blackanddecker.com.au
QUICK CONNECT SYSTEM
BDCMTR-XE
ROuTER
ATTAChmENT

2
PARTS AND FEATURES
figure A
1. Router attachment
2. Spindle lock button
3. Active lock-off button
4. Nut and Collet
5. Depth stop bar
6. Depth of cut scale
7. Chip shield
8. Base
Not shown:
Wrench
Additional accessories are available at extra cost
from your local Black & Decker dealer.
1
2
4
A
3
5
6
7
8

3
ENGLISH
(Original instructions)
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, re and/or serious injury.
Intended use
Safety instructions
General power tool safety warnings
@ Read all safety warnings and all instructions provide with your power unit (BDCDMT108-XE,
before using this accessory.BDCDMT180-XE)
:
General power tool safety warnings
@WARNING! Read all safety warnings and all instructions.
WARNING!
WARNING!
Your Black & Decker multi-purpose tool has been designed for a wide range of DIY applications.
Using the router head , this tool is intended for routing wood and wood products.
• Hold
Cutting a “live” wire may make exposed metal parts of the power tool “live” and shock the operator.
•
. Holding the
work by your hand or against the body leaves it unstable and may lead to loss of control.
• Keep handles dry, clean, and free from oil and grease. This will enable better control of the tool.
•
handles. These precautions will reduce the risk of personal injury.
K
uncontrolled router to lift up and out of the workpiece toward the operator.
•
KICKBACK
could cause the router to jump backwards (see
• M Use back and/or front stops xed to the fence when doing
stopped work.
• Use sharp cutters. Dull cutters may cause the router to swerve or stall under pressure.
• It may be extremely hot.
• If the cutter head
is still spinning when the tool is laid down, it could cause injury or damage.
• If the bit is in contact
with the workpiece when the motor starts it could make the router jump, causing damage or injury.
•
•
• Use of larger than
recommended bits can result in a hazard.
•
•
•
This tool is intended for consumer use only.
Termékspecifikációk
Márka: | Black & Decker |
Kategória: | router |
Modell: | BDCMTR-XE |
Szüksége van segítségre?
Ha segítségre van szüksége Black & Decker BDCMTR-XE, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók router Black & Decker
13 Augusztus 2024
7 Augusztus 2024
2 Augusztus 2024
1 Augusztus 2024
25 Július 2024
24 Július 2024
17 Július 2024
8 Július 2024
6 Július 2024
5 Július 2024
Útmutatók router
- router PulseAudio
- router Kathrein
- router CradlePoint
- router 7inova
- router Aruba
- router Google
- router Samsung
- router Hercules
- router Güde
- router Milesight
- router Strong
- router Lumantek
- router T-Mobile
- router Airlive
- router Zoom
Legújabb útmutatók router
9 Április 2025
9 Április 2025
9 Április 2025
31 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
23 Március 2025