Használati útmutató Blaupunkt KPT-S1

Blaupunkt Térfigyelő kamera KPT-S1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Blaupunkt KPT-S1 (3 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
Wireless Remote Keypad with Proximity Tags (KPT-S1)
P
Pa
ar
rt
ts
s
D
De
es
sc
cr
ri
ip
pt
ti
io
on
n
1. Active LED (Blue/Orange)
2. Status LED (Blue/Red)
3. Fault LED (Orange)
4. Away Arm Key
5. Home Arm Switch
6. Status Key
7. Disarm Key
8. Panic Alarm
Press both 1 and 3 key to trigger Panic alarm
9. Fire Alarm
Press both 4 and 6 key to trigger Fire alarm
10. Emergency Alarm
Press both 7 and 9 key to trigger Emergency alarm
11. Battery Insulator
12. Mounting Knockouts
13. Tamper Switch
The Tamper switch protects the from unauthorized cover PIR
opening.
14. RFID TAG
P
Pa
ac
ck
ka
ag
ge
e
C
Co
on
nt
te
en
nt
t
1 x Remote Keypad
2 x wall plugs and screws
2 x RFID Tags
1 lithium batteries -installed) x 3V (pre
For learning the Remote Keypad:
1. Put the Control Panel into learning mode.
2. and Press both #
keys to transmit learn code
3. Refer to Control Manual to complete the learning process.
The Remote Keypad has 2 knockouts on the back where plastic
is thinner for wall mounting.
1. Use the two knockouts on the back to mark position on the
wall at chest height. Open the back cover.
2. Drill holes into the wall using the knockouts as template.
3. Fix the keypad base onto the wall with the screw and plugs
provided.
4. Replace the keypad cover onto the base.
S
St
ta
an
nd
db
by
y
M
Mo
od
de
e
The Remote Keypad features a power saving feature. When no
key is pressed for 5 seconds, the Remote Keypad will turn off
automatically to conserve power. When any key is pressed, the
Remote Keypad will wake up and turn on Active LED to indicate it
is now under normal operation
K
Ke
ey
yp
pa
ad
d
S
Se
et
tt
ti
in
ng
g
The Remote Keypad features a Test (programming) mode for you
to customize its setting. Before you start using the Remote
Keypad, you should first finish configuration setting.
The Remote Keypad also feature a Keypad PIN code which is
used to access the Test mode, To enter Test Mode, Enter
“ ”0000 (Default Keypad PIN code) key, the Active Orange + “ ”＊
LED will light up
Under Test Mode, the following functions include:
Key
Function
“ ” + “ ”＊1
Tag Management
“ ” + “7” ＊
Transmit learn code (same as pressing
both keys under normal mode) #and
“ ” + “2” ＊
Enable dual key Panic Alarm function
“ ” + “3” ＊
Enable dual key Fire Alarm function
L
Le
ea
ar
rn
ni
in
ng
g
O
Op
pe
er
ra
at
ti
io
on
n
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
Surface Fixing
Knockouts x 2
“ ” + “4” ＊
Enable dual key Medical Alarm function
“ ” + “ ”＊5
Disable all dual key functions
“ ” + “6”＊
Change Keypad PIN Code:
1. Enter old code + “Status” Key
2. Enter new 4-digit code + “#” key
“ ” + “8”＊
Enable Arming without Use PIN code
function
“ ” + “9”＊
Enable Arm with User PIN code function
( ) Default
“ ” + “0”＊
Enable Arming with KP PIN code
function
“Disarm” twice
To leave Test Mode
RRFFIIDD TTAAGG MMaannaaggeemmeenntt
The Keypad can function with the RFID tags included in the
package. By assigning User PIN Code to a Tag, you can use the
Tag to Arm/Home/Disarm the Control Panel with a simple swipe.
Up to 6 tags can be stored in the Keypad and assigned to User
PIN Codes for panel control:
Add New Tag:
1. Enter Keypad Test Mode.
2. Enter 1 for Tag Management. Red Status LED will light up. “ ”＊+“ ”
3. Enter a 4-digit Control Panel User PIN Code key. “ ” + “ ”#
Status RED LED
flashes
Status Blue LED
flashes with 4 beeps
Status Red LED
flashes with 4 beep
4. Put the TAG close to the Keypad when Status Red LED is
flashing .
Status RED LED On
with 2 beeps
Status Red LED On
with 1 bee
Status Red LED On
with 4 beeps
5. After finish adding new Tag, press Disarm key to exit Tag “ ”
Management.
Remove Existing Tag:
1. Enter Keypad Test Mode.
2. Enter 1 for Tag Management. Red Status LED will light “ ”+“＊”
up.
3. Enter the User PIN Code of the Tag you want to remove, then
press the Status key.
4. The Keypad will emit a long beep, the Tag info is removed.
A
Ar
rm
m/
/H
Ho
om
me
e/
/D
Di
is
sa
ar
rm
m
If Remote Keypad is set to “Arm with Use PIN code ( ” “ ” + “9”＊
under Test Mode)
Away Arm
1. Enter a Control Panel User PIN Code +
“ ”Arm Key.
2. Press Arm Key + put Tag on Keypad. “ ”
Home Arm
1. Enter a Control Panel User PIN Code +
“ ”Home Key.
2. Press Home Key + put Tag on Keypad. “ ”
Disarm
1. Enter a Control Panel User PIN Code +
“ ”Disarm Key.
2. Press Disarm Key + put Tag on Keypad. “ ”
If Remote Keypad is set to Arm without Use PIN code ( 8“ ” “ ” + “＊”
under Test Mode)
Away Arm
Press Arm Key “ ”
Home Arm
Press Home Key “ ”
Disarm
Enter a Control Panel User PIN Code +
“ ”Disarm Key
If Remote Keypad is set to Arm with Keypad PIN code (“ ” “ ” + ＊
“ ”0 under Test Mode)
Away Arm
Enter Keypad PIN Code + Arm Key “ ”
Home Arm
Enter Keypad PIN Code + Home Key “ ”
Disarm
Enter Keypad PIN Code + Disarm Key “ ”
C
Ch
he
ec
ck
ki
in
ng
g
C
Co
on
nt
tr
ro
ol
l
P
Pa
an
ne
el
l
S
St
ta
at
tu
us
s
Press the Status key to inquire Control Panel status, the Status
LED will light up according to Control Panel mode
Red LED On
Away Arm mode
Red LED Flash
Home Arm mode
Blue LED on
Disarm mode
D
Du
ua
al
l
K
Ke
ey
y
A
Al
la
ar
rm
m
F
Fu
un
nc
ct
ti
io
on
n
Dual Key Alarm function will activate alarm when both keys are
pressed at the same time. To use the functions, please enable
them under Test Mode. (Default are disabled)
“ ” “ ”1 + 3
Panic Alarm
“ ” “ ”4 + 6
Fire Alarm
“ ” “ ”7 + 9
Emergency Alarm
L
LE
ED
D
I
In
nd
di
ic
ca
at
to
or
rs
s
AAccttiivvee LLEEDD
The Active LED light up whenever any key is pressed.
Off
Keypad in Standby Mode
Blue LED On
Keypad in Normal Operation
Blue LED Flash
Keypad in Normal Operation and under
Low Battery
Orange LED On
Keypad in Test Mode
Orange LED Flash
Keypad in Test Mode and under Low
Batte ry
S
St
ta
at
tu
us
s
L
LE
ED
D
The Status LED light up during operation or when the Status key “ ”
is pressed to inquire Control Panel status
Red LED On
Away Arm mode
Red LED Flash
Home Arm mode
Blue LED On
Disarm mode
Blue LED Flash
No reply from Control Panel
Incorrect PIN code
Request for Home arm when under Away
arm mode
Request for Force Arm
F
Fa
au
ul
lt
t
L
LE
ED
D
The Fault LED light up whenever faults are detected in the alarm
system.
Orange LED On
Alarm in memory
Orange LED Off
Fault exists in system
BBaatttteerryy
The Remote Keypad uses 3 lithium battery as its power one V
source. It also features low battery detection function to notify the
Control Panel when battery voltage is low.
When the Remote Keypad is on low battery, follow the procedure
below to change the batteries.
1. Open the back cover
2. Remove the old batteries
3. Press any key several times to fully discharge.
4. Insert the new batteries observing correct polarity.
5. Replace the back cover.
FFaaccttoorryy RReesseett
If you forget your Keypad PIN code, or the Remote Keypad has
any problem, you can reset the Remote Keypad to factory
default.
1. Open the back cover and remove the battery
2. Press and hol 3 key and insert battery d “ ”
3. The Remote Keypad will sound 3 short beeps
4. Release 3 key, the reset process is now complete “ ”
E
En
nv
vi
ir
ro
on
nm
me
en
nt
ta
al
l
C
Co
on
nd
di
it
ti
io
on
n
- C to 40 C, relative humidity 85% non-condensing 10° ° .
R
Ra
ad
di
io
o
868 MHz
S
Sp
pe
ec
ci
if
fi
ic
ca
at
ti
io
on
n

Termékspecifikációk

Márka: Blaupunkt
Kategória: Térfigyelő kamera
Modell: KPT-S1

Szüksége van segítségre?

Ha segítségre van szüksége Blaupunkt KPT-S1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Térfigyelő kamera Blaupunkt

Blaupunkt

Blaupunkt DC-S3 Útmutató

4 Október 2024
Blaupunkt

Blaupunkt PB-S1 Útmutató

3 Október 2024
Blaupunkt

Blaupunkt KPT-S1 Útmutató

18 Szeptember 2024
Blaupunkt

Blaupunkt KP-S1 Útmutató

2 Augusztus 2024
Blaupunkt

Blaupunkt VIO-D40 Útmutató

1 Augusztus 2024
Blaupunkt

Blaupunkt BX-S1 Útmutató

31 Július 2024
Blaupunkt

Blaupunkt IRP-S1L Útmutató

30 Július 2024
Blaupunkt

Blaupunkt TS-S1 Útmutató

28 Július 2024
Blaupunkt

Blaupunkt RC-S1 Útmutató

25 Július 2024
Blaupunkt

Blaupunkt RC-S3 Útmutató

24 Július 2024

Útmutatók Térfigyelő kamera

Legújabb útmutatók Térfigyelő kamera

Hikvision

Hikvision DS-2CE10DF8T-FSLN Útmutató

6 Április 2025
Hikvision

Hikvision DS-2CE56C0T-IRPF Útmutató

5 Április 2025
Hikvision

Hikvision DS-2CD2141G1 Útmutató

5 Április 2025
Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Útmutató

15 Január 2025
Toshiba

Toshiba IKS-WR7412 Útmutató

14 Január 2025
Flir

Flir FC-610 O Útmutató

13 Január 2025
AVerMedia

AVerMedia FC1320-P Útmutató

13 Január 2025
Digitus

Digitus OptiMax DN-16037 Útmutató

13 Január 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Útmutató

13 Január 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Útmutató

13 Január 2025