Használati útmutató Blaze BLZ-KMDO-SDSH

Blaze Barbecue BLZ-KMDO-SDSH

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Blaze BLZ-KMDO-SDSH (3 oldal) a Barbecue kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
-
Assembly Instructions
KAMADO SIDE SHELF KIT: BLZ- - KMDO SDSH
Your kamado side shelf kit includes two side shelves. Each shelf is identical and can be installed
on either side of the grill. You will need the included metric # 5 + # 6 millimeter allen wrench to
install.
1. Each side shelf has two brackets welded off to the right and left of the shelf itself. These
brackets fasten to the grill body via the installed on the grill four fasteners pre- body just below
the cooking grid surface. Place the openings in the brackets over the fasteners and slide
downward. See images below:
2. Once the shelf brackets are properly positioned over the fasteners, tighten the fasteners with
the included #5 mm allen wrench.
3. Underneath the shelf, you will find a shelf leveling / stabilizing screw. This screw holds tension
against the grill body leveling the shelf and holding it securely in this position. Tighten this screw
either by hand or using the #6 mm allen wrench. When complete, the shelf should be level. See
below:

Termékspecifikációk

Márka: Blaze
Kategória: Barbecue
Modell: BLZ-KMDO-SDSH

Szüksége van segítségre?

Ha segítségre van szüksége Blaze BLZ-KMDO-SDSH, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek