Használati útmutató BlueAnt SuperTooth Light

BlueAnt Autós készlet SuperTooth Light

Olvassa el alább 📖 a magyar nyelvű használati útmutatót BlueAnt SuperTooth Light (10 oldal) a Autós készlet kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
Product Description
SUPERTOOTH LIGHT is a Bluetooth handsfree kit that supports headset or hands-
free pro le phones. Its special features include Full DSP Noise Cancellation/Echo
Cancellation, thus, it provides advanced audio quality. It is designed for easy hands-
free operation and superior performance.
Don’t forget: Drive safely and within the law.
Check if the national or local legislation in your country does limit the use of mobile
phones while driving. It is up to the user of this product to respect the said legislation
in the area where they lives.
Product Overview
1 Accept Button
2 End/Reject Button
3 Bluetooth Indicator
4 Charge Indicator
5 Microphone Shaft
*Press-and-release to Switch On
*Push-in to Switch Off
6 Speaker
7 Volume Down
8 Volume Up
9 Charger Port
10 Magnets
Charging
When the turns Red, the kits’ battery is low. Charge the unit.Charge Indicator (4)
1. Connect the supplied charger to an external power source.
Connect the charger’s plug to the Charger Port (9)
of the SUPERTOOTH LIGHT.
Charge Indicator (4) Status:
Steady Red: Low Battery
Steady Orange: Charging
Steady Green: Full Charge
2. When fully charged, disconnect the charger.
Power On/Off
Power On: Microphone Shaft (5) Push in the until you hear a click, and release.
The shaft will spring out from the body of the unit and x in place.
Power Off: Microphone Shaft (5) Push the inside the unit until it clicks.
Pairing to your Bluetooth Mobile Phone
Pair the SUPERTOOTH LIGHT to your Bluetooth mobile phone to create a “Pairing”
link, or audio connection between the two. This has to be only done once when rst
connecting each new phone.
1. From OFF, Press and Hold the .Accept Button (1)
First Time Pairing to your Bluetooth Mobile Phone
When you turn ON your Supertooth Light for the rst time, it will automatically go
into Pairing mode ready to be found by devices in Bluetooth searches. This will be
the case until you have successfully paired a phone. If you have already paired a
phone, please go to the next section.
1. Power ON your Supertooth Light. The will turn a blinking Bluetooth Indicator (3)
red/blue, The kit is now in pairing mode.
2. Go to Point 3 in the next section, “Pairing to your Bluetooth Mobile phone”

Termékspecifikációk

Márka: BlueAnt
Kategória: Autós készlet
Modell: SuperTooth Light

Szüksége van segítségre?

Ha segítségre van szüksége BlueAnt SuperTooth Light, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Autós készlet BlueAnt

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

Metra

Metra 99-8270HG Útmutató

3 Április 2025
Metra

Metra 99-8722B Útmutató

3 Április 2025
Metra

Metra 99-7802CH Útmutató

3 Április 2025
Metra

Metra 99-8214TG Útmutató

3 Április 2025
ZZ-2

ZZ-2 IC-SYM Útmutató

2 Április 2025
Metra

Metra 99-4000 Útmutató

1 Április 2025
Nokia

Nokia HF-33W Útmutató

16 Január 2025
Renegade

Renegade REN10KIT Útmutató

31 December 2025
Metra

Metra 95-7883HG Útmutató

29 December 2024
Metra

Metra AX-ADCT4 Útmutató

29 December 2024