Használati útmutató Bobrick B-164
Oldalak 3 Engels Spiegel
Olvassa el ingyen online a(z) Bobrick B-164 használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 37 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést

Mark the location of the mounting holes. See individual product
specications on page two for mounting hole locations.
1.
PARTS/TOOLS NEEDED:
Backlit MirrorMounting HardwareElectric DrillWiring Kit
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
Read all instructions before using this mirror.
MIRRORS SHOULD ONLY BE INSTALLED USING THE FOLLOWING INSTRUCTIONS. FAILURE TO
FOLLOW THESE INSTRUCTIONS WILL VOID THE WARRANTY.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
• Unplug power before putting on or taking off parts.
• Close supervision is necessary when this mirror is used by, or near children, invalids, or disabled persons.
• Use this mirror only for its intended use as described in these instructions. Do not use attachments not recommended by Bobrick.
• Never operate this mirror if it has a damaged cord, if it is not working properly, if it has been dropped or damaged, or dropped
into water. Contact Bobrick for a replacement mirror.
• Keep the cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Exposing the mirror edges to liquids may cause a permanent discoloration to the mirror etching that is NOT covered by Bobrick warranty.
• Risk of electric shock - Connect this mirror to a properly grounded outlet only. See grounding instructions. WARNING:
CLEANING INSTRUCTIONS
• Clean mirrors with warm water and a soft, lint free cloth, do not allow liquids to seep under the edges. Don’t use abrasive,
acid or alkali cleaners or products with ammonia or vinegar.
• Apply mild cleaners directly to a cloth, do not spray directly on the mirror. Applying liquids directly to the mirror’s surface may allow the
liquid to seep/wick between the layers on the edge of the mirror. If this occurs there may be a permanent discoloration on the mirror
etching which is NOT covered by Bobrick warranty.
• Dry mirror immediately following cleaning and make sure all joints and edges are dry.
ADA requires that “Mirrors shall be mounted with the bottom edge of the
reecting surface no higher than 40 in (1015mm) above the nished oor
1.”
For lit mirrors this means the dimension is to the inner most edge of the lit portion.
40"
Finished oor
INSTRUCTIONS FOR INSTALLATION
BOBRICK MODEL B-164 BACKLIT MIRROR
Termékspecifikációk
| Márka: | Bobrick |
| Kategória: | Spiegel |
| Modell: | B-164 |
Szüksége van segítségre?
Ha segítségre van szüksége Bobrick B-164, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Spiegel Bobrick
Összes Bobrick Spiegel használati útmutató
Útmutatók Spiegel
Legújabb útmutatók Spiegel
Livarno Lux IAN 277611 Útmutató Livarno Lux IAN 282004 Útmutató Livarno Lux IAN 57157 Útmutató Livarno Lux IAN 69443 Útmutató Livarno Lux IAN 277084 Útmutató Livarno Lux IAN 57183 Útmutató Girmi Stupenda Make-up BE02 Útmutató Girmi BE05 Útmutató Girmi Stupenda Make-up BE03 Útmutató Girmi Stupenda Make-up BE04 Útmutató