Használati útmutató Body Solid G3S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Body Solid G3S (14 oldal) a Fitness berendezések kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/14
Body-Solid
®
Assembly Instructions
1
Be careful to assemble all components
in the sequence they are presented.
mm
Inch
2
STEP
A. Attach Frame Leveler (8) to Main Base Frame (A) as shown.
Attach Main Base Frame (A) to Rear Base Frame (B) and Rear Vertical Frame (C) using:
Two 43 (3/8”x 2 3/4” hex head bolt)
Two 55 (3/8” washer)
Two 51 (3/8” nylon lock nut)
and
Two 63 (3/8”x 2 3/4” carriage bolt)
Two 51 (3/8” nylon lock nut)
B. Attach three End Caps (4) to Main Base Frame (A).
Attach two Foot Caps (6) to the ends of Rear Base Frame (B).
Attach End Cap (4) to the top of Rear Vertical Frame (C).
C. Attach Angled Vertical Frame (D) to Main Base Frame (A) using:
Two 43 (3/8”x 2 3/4” hex head bolt)
Two 51 (3/8” nylon lock nut)
D. Attach Top Frame (E) and Flat Plate (70) to Angled Vertical Frame (D) using:
Two 42 (3/8”x 3” hex head bolt)
Two 51 (3/8” nylon lock nut)
E. Connect Top Frame (E) and Flat Plate (65) to Rear Vertical Frame (C) using:
Two 62 (3/8”x 2 1/2” hex head bolt)*
*Note:
Hex head bolts (62) go into threaded housing inside Top Frame (E)
NOTE:
Finger tighten all hardware in this step. Do Not
wrench tighten until end of step 4.
1
3
STEP

Termékspecifikációk

Márka: Body Solid
Kategória: Fitness berendezések
Modell: G3S

Szüksége van segítségre?

Ha segítségre van szüksége Body Solid G3S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek