Használati útmutató Bogen MB8TSL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bogen MB8TSL (2 oldal) a hangszóró kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 10 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/2
Installation Instructions
1. Determine where the speaker(s) will be mounted. Ensure power is not connected to speaker wires prior to installation.
Follow all local safety and building codes and route speaker wires to desired wall or ceiling location. Pull approximately
12" of wire through opening in mounting surface.
2. Pull speaker wire through the back of the large opening of the speaker enclosure. Using the supplied mounting hardware,
secure the enclosure to the mounting surface. Note that two toggle bolts (for sheet rock surfaces) and two wood screws
(for securing to solid wood/beams) have been included. Utilize the two washers (supplied) as shown in Figure 1 with either
toggle bolts, wood screws, or other user supplied hardware.
MB8TSL, MB8TSQ, MB8TSLVR, MB8TSQVR
70V/25V Metal Box Speakers
For Surface Mounting to Walls and Ceilings
© 2005 Bogen Communications, Inc.
Specifications subject to change without notice.
54-2135-01C 0809
Use two of the enclosure’s mounting
holes as a template (diagonally
opposed), and mark screw hole
locations. If toggle bolts will be
used, drill two, 1/2" diameter holes
in the mounting surface, otherwise
drill a hole appropriate for hardware
being used.
Figure 1 - Sheet rocked ceiling mount example
Package Contents:
Back box enclosure
Grille with speaker assembly
Two crimp-type connectors
Two toggle bolts
Two wood screws
• Two washers
Four 1" screws for attaching
grille assembly
Ceiling
Toggle bolts
(for sheet rock)
Enclosure
mounting holes
Wiremold®
Knockouts

Termékspecifikációk

Márka: Bogen
Kategória: hangszóró
Modell: MB8TSL

Szüksége van segítségre?

Ha segítségre van szüksége Bogen MB8TSL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek