Használati útmutató Boss RC-10R

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Boss RC-10R (26 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/26
Owners Manual
Before using this unit, carefully read “USING THE UNIT SAFELY and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the
Owner’s Manual (p. 23)). After reading, keep the document(s) where it will be available for immediate reference.
© 2019 Roland Corporation
* The power to this unit will be turned o automatically after a predetermined
amount of time has passed since it was last used for playing music, or its
buttons or controls were operated (AUTO OFF function).
If you do not want the power to be turned o automatically, disengage the AUTO
OFF function (p. 5).
5Unsaved data is lost when the power turns o. Before turning the power o,
save the data that you want to keep.
5To restore power, turn the power on again.
2
Panel Descriptions
Top Panel
1 2
5 6
9 10
3
4
7 8
1 Display
Shows the number of the current phrase memory, and
various other information.
2 [VALUE] knob
Selects the parameter that’s shown in the display, or
edits the value.
3 [MENU] button
Accesses various parameters.
MEMO
By pressing the [MENU] button and [EXIT] button simultaneously,
you can save the phrase (p. 17).
4 [EXIT] button
Used to move the cursor shown in the display, and also
for other purposes.
5 LOOP indicator
The indicators around the edge light according to the
status of recording, playback, or overdubbing.
The center of the indicator shows the division (TRK 1,
TRK 2) of the loop that’s playing.
Panel Descriptions
3
6 [LEVEL] (LOOP) knob
Adjusts the volume of the phrase loop.
7 [LEVEL] (RHYTHM) knob
Adjusts the volume of the rhythm.
8 RHYTHM indicator
The indicators around the edge light according to the
rhythm playback status.
The center of the indicator shows the division (INTRO,
PTN 1, PTN 2, ENDING) of the rhythm that’s playing.
9 [LOOP] switch
Switches between recording, playback, and
overdubbing.
For an empty phrase
Recording -> Playback -> Overdubbing
For a phrase that contains data
Playback -> Overdubbing
During playback or overdubbing
Hold down the switch for two seconds or longer to
Undo (cancel the recording or the last overdub).
Hold down the switch once again for two seconds or
longer to Redo (cancel the Undo).
Press the switch twice in succession to stop.
While stopped
Hold down the switch for two seconds or longer to clear
the phrase.
10 [RHYTHM] switch
While the rhythm is stopped
Press the switch to play the rhythm.
Hold down the switch for two seconds or longer to turn
SYNC on/o (p. 10).
While the rhythm is playing
Press the switch to add a ll-in.
Hold down the switch for two seconds or longer to
switch the division (PTN 1/PTN 2).
Press the switch twice in succession to stop playback.

Termékspecifikációk

Márka: Boss
Kategória: nincs kategorizálva
Modell: RC-10R

Szüksége van segítségre?

Ha segítségre van szüksége Boss RC-10R, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Boss

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025