Használati útmutató BOYA BY-M1DM Duo Lavalier

Olvassa el alább 📖 a magyar nyelvű használati útmutatót BOYA BY-M1DM Duo Lavalier (2 oldal) a mikrofon kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.5 csillagra

Dual Omni-directional Lavalier Mic

BY-M1DM

# ItemDescription

1Omni-directional

mi phonecro

Picksp sound. Thsound enters thgh thhos in thtop ue roue lee

of the caps.ule

2Power ckProvides power for theicrophone for useith ceras and pa m wam

otherices requiring we mic. deva pored

3 tgTurns power on to the microphone. For use wi caras Camera set inthethme

and othervices requiringweredic. de a po m

4 OFF/rtp neSmaho

setting

Turns the power o to the microphone. For use with

Smartphonesnothervices requiri ad deng an unpowereic. d m

NOTE: Keep the ice in this de when not in use to sa devmove

the battery.

53.5 mm connectorCoe the microphone to the Smartphone, camera, nncts

camcorder, otr coing ice.orhererddev

• Clip-on lapel microphone for Smartphones, cameras,

camcorders, audio recorders, PCs, and other audio/video

recording devices

• Omni-directional Condenser Microphone

• Excellent for Interviews

• Each Mic Routes to Discrete Channel

• Improved Sensitivity and Signal-to-Noise

• Includes Carrying Pouch

Using the microphone with a laptop

Us t microphone wi a rainghethcame

1 Install battery in right polarities.

2 Attach the microphone to your clothing (see previous

instructions).

3 Move the switch on the power pack to the Camera (on)

setting.

4 Plug the 3.5 mm connector into the audio input jack of

your DSLR, Point and Shoot camera, or camcorder, and

begin lming.

Note

Not all cameras have a microphone input. Verify

this with your camera manufacturer. Many cameras

have headphone, remote control, and other ports

that look similar to a microphone input. Make sure

that you are using the correct one.

1) BOYA BY-M1DM can only use laptop whose headphone

jack and microphone jack is combined.

2) No need to install battery.

Note

1) When move switch on the power pack to the Camera

(on), make sure to install battery in right polarities.

2) No need to install battery when OFF/ Smartphone

setting.

3) Make sure set the switch rst, then connect microphone

with your equipment.

Usg cropth rhonein the mihone wi aSmatp

1 Attach the microphone to your clothing (see previous

instructions).

2 Move the switch on the power pack to the OFF/Smartphone.

3 Plug the 3.5 mm connector into the audio jack of your

smartphone.

4 Open the audio-only or video recording app and begin

recording.

1 Attach the microphone to your clothing (see previous

instructions).

2 Move the switch on the power pack to the OFF/Smartphone.

3 Plug the 3.5 mm connector into the audio jack of your

laptop.

4 Open the audio app and begin recording.

Caution

No need to install battery when using with

Smartphone.

Replaing the c baerytt

1Unscrew e two rts of e power k d thpathpacan

sete e eces.parathpi

2Remove the old battery from its compartment in the

power k.pac

3Pl e ry, wi e + d - oriented as ace thnew batteth than

indited, into e tery corent in e cathbatmpatmth

power k. e + symbol is stamped inside the pacTh

compartm r referee.ent fonc

Troublhinges oot

ProblemSo tionlu

The microphone

does not turn on

The tery be ioectly orient in the ttery batmayncrredba

comparnt.Op the bary compartment and make sure the tme entte

batalledtery is coectly inrrst.

The battery m be exhausted. Replace it with a new one. See the ay

Specications section r compatib replacements.fole

The ttery rmins are dirty. Open the tery compartment and batealbat

clewitttan the terminals h coa on swab.

The ttery ba

dischas too rge

quickly

The microphone beg on (in the position). Turn o isinleftCamera

ththe microphone by moving e switch to the O/Smartphone

position.

Yore usg the microphone in extrem hot or cold condons u ainelyiti

which ins it quily.drack

Too much

ambience noise is

beiniedpg pck u

Make sure that the microphone is as close as poible to the subject. ss

A certainmnt ofbient noisisnaiblin lo aou ame uvodae ud

environments.

SccationsSccationspe ipe i

Package Contents:

• One BY-M1DM Lavalier microphone

• Foam wind screen *2

• Clothing clip *2

• Velcro *2

• Battery (LR44)

• Carrying case

• User Manual

Main features

Features

Tips and notes:

1

7689 10

2 3 4 5

Thanks for choosing BOYA!

The BOYA BY-M1DM is a Dual Lavalier Universal Microphone,

with a single 1/8" stereo connector, it can be used with

smartphones, DSLR camears, camcorders, audio recorders,

PC and other recording devices.

It consists of two of the well-received omnidirectional lavalier

microphones and 4m (13') length cable, it’s prefect for

interviews, presentations, podcasts, webcasts, or any situation

where more than one subject needs to be recorded.

Introduction

In order to ensure you have a good experience, please read

this manual thoroughly and retain it for future reference.

(8-10 inches)

20-25cm

Attach the microphone to the front of your clothing

with the clothing clip, about 20-25cm (8-10 inches)

from your face.

1) Attach the microphone upside down to reduce

excessive breath noises and tonal inconsistencies

due to head movements.

2) It is recommended that you use the foam wind

screen at all times to avoid wind noise, even when

recording inside.

Mounting the microphone to your Clothing

① Tape a loose loop of the microphone cord to the inside

of your clothing.

This provides additional strain relief for the microphone

cord and isolation from unwanted noise.

② Before recording an important event, record and play back

a short test clip with the microphone attached to ensure

audio recording is functioning properly.

Using the microphone with other devices

1 Install battery in right polarities.

2 Attach the microphone to your clothing (see previous

instructions).

3 Move the switch on the power pack to the Camera (on)

setting.

4 Plug the 3.5 mm connector into the audio input jack of

your device (audio recorder, amplier etc.), and begin

recording.

Note

Transducer:

Polar pattern:

Frequency Range:

Signal/Noise:

Sensitivity:

OutputImpedance:

Connector:

Powerrequirement:

Cablelength:

Netweight:

ElectretCondenser

Omni-directional

65Hz~18KHz

74dBSPL

-30dB+/-3dB/0dB=1V/Pa,1kHz

1000Ohmorless

3.5mm(1/8”)4-polegoldplug

LR44(included)

4m(13ft)

68g(2.4oz)

www.boya-mic.com

Using the microphone

Attang t microone to the chihephclhinotg

clip

•Irt the micropho into the plastic loop on nsenethe

clhing cliot p.

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.

The BOYA logo is a trademark which is registered and owned by

Shenzhen Jiayz Photo Industrial., Ltd.

COPY RIGHT 2010-2020

Email: sales@boya-mic.com

www.boya-mic.com / www.jiayz.com

Instruction Manual

Termékspecifikációk