Használati útmutató Boyo VTB201MA
Oldalak 1 Engels Dashcam
Olvassa el ingyen online a(z) Boyo VTB201MA használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 25 ember találta hasznosnak. Kérdése van a modellről? Tegyen fel kérdést
VTB201MA QUICK INSTALLATION GUIDE
Quick Installation Guide
1.System Overview
One VTB201MA high resolution HD CMOS color camera
with the following features:
yWeatherproof and water reistant
yMirror/ Non-Mirror image selectable switch
yWide-angle lens170°
yBuilt-in Microphone
y360-degree adjustable mounting angle
yAuto-iris lens that automatically adjusts to light conditions
yInfrared light for improved image quality in low-light
situations
yNightvision distance of approx 8M
20M Extension Cable Included
Supplied installation accessories
2. Installation
Install the VTB201MA as follows:
a.Install the VTB201MA camera in the desired location, as
follows:
1)Fasten the camera mounting bracket, using the 4 self-
tapping Philips screws, to the desired mounting
surface, as shown in the Step 1 arrows of Figure 1.
2)Position the camera in the camera mounting bracket.
Adjust the camera to the proper angle, and then attach
the camera and sun visor to the camera mounting
bracket using the 4 supplied hex-head machine screws
(with washers), as shown in the Step 2 and Step 3
arrows of Figure 1.
Figure 1. Installing the Camera
b.Route the extension cable from the camera location to the
location of the output device (not supplied), such as a
monitor or switcher.
c.Insert the male connector of the extension cable into the
appropriate female audio/video port of the output device
(not supplied), such as a monitor or switcher.
3.Normal/Mirror Selector
The camera default setting is in reverse viewing. To change to
non-mirror viewing, unplug the jumper plug with the green wires
and re-power the camera for the changes to take effect.
4.Grid Line Selector
The camera default setting is grid line on. To turn off the grid
lines, unplug the jumper plug with the blue wires and re-power
the camera for the changes to take effect.
5. Specifications
Item Specification
Image Sensor1/3 1089
TV SystemNTSC
Effective Pixels720 x 480
Minimum Illumination0.0 Lux
Power Consumption12 VDC, 250mA Max
Operating Temperature-20°C to 70°C
Dimensions
(Width x Height x Depth)
3 inches x 3 inches x 2.25 inches
Lens Angle170°
Supplied AccessoriesManual
Screws
20M Extension cable
DC Power cable
2 Jumper terminals
Warranty card
Registration card
CAUTION: To reduce the risk of electrical shock, disconnect the
battery from the electrical system of the vehicle before
starting the installation.
CAUTION: Before inserting screws into the mounting surface,
ensure that the underside of the mounting surface is
clear of equipment that might be damaged by the
screws.
Termékspecifikációk
| Márka: | Boyo |
| Kategória: | Dashcam |
| Modell: | VTB201MA |
Szüksége van segítségre?
Ha segítségre van szüksége Boyo VTB201MA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Dashcam Boyo
Boyo VTL405TJ Útmutató Boyo VTC500DIY Útmutató Boyo VTL275LTJ Útmutató Boyo VTB301HD Útmutató Boyo VTL402TJS Útmutató Boyo VTL375LTJ Útmutató Boyo VT-BP3 Útmutató Boyo VTR1188M Útmutató
Összes Boyo Dashcam használati útmutató