Használati útmutató Broan NDK35830WW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Broan NDK35830WW (4 oldal) a Páraelszívó kategóriában. Ezt az útmutatót 17 ember találta hasznosnak.

/ 4 PDF

NDK358 SERIES

NON-DUCT FILTER KIT

For use with Broan AP Series or RP2 Series

range hoods.

ALUMINUM

FILTER

NON DUCT

FILTER

NON DUCT

FILTER TABS

ALUMINUM FILTER

FINGER RING

3. Lift the hood up and over the 4 THREADED

STUDS. Secure hood to HOUSING with 4 HEX

NUTS (provided).

MOUNTING

SCREWS

HEX

NUTS

HOUSING

ALUMINUM

FILTERS

THREADED

STUDS

4. Remove ALUMINUM FILTERS from hood

(if previously installed).

5. Slide ALUMINUM FILTERS beneath TABS on NON

DUCT FILTERS. Make sure FINGER RING faces

outward. Install filters into hood with ALUMINUM

FILTERS facing outward.

Replacement Filters:

• Non-Duct Filter ...............................................88F

• Aluminum Filter (Qty. 2) ..................................97017455

• Aluminum Filter with Microban®(Qty. 2)..........97017456

9"

CENTER

LINE

HOUSING

MOUNTING

SCREWS (4)

WOOD SHIMS

(recessed-bottom

cabinets only)

CABINET FRONT

CABINET

BOTTOM

1315/16" (30" hood)

1615/16" (36" hood)

1315/16" (30" hood)

1615/16" (36" hood)

1½"

1. Screw the 4 MOUNTING SCREWS (provided) into

the CABINET BOTTOM where shown. Recessed-

bottom cabinets require WOOD SHIMS to be

secured to the cabinet bottom before attaching the

mounting screws.

VERTICAL DUCT

KNOCKOUT

2. Remove VERTICAL DUCT KNOCKOUT from hood.

Termékspecifikációk