Használati útmutató Candy CDF 715T-16S

Candy mosogatógép CDF 715T-16S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Candy CDF 715T-16S (25 oldal) a mosogatógép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/25
CDF 715 T
DISHWASHER
PERILICA POSUDJA
ZMYWARKI
POMIVALNI STROJ
User instructions
Upete za kori‰tenje
Instrukcja obs∏ugi
Navodilo za uporabo
EN
HR
PL
SL
CONTENTS
Description of the controls
Technical data
Operating the programmes and special functions
The Waterblock system
Water softner unit
Programme selection
pag. 3
pag. 3
pag. 4
pag. 8
pag. 9
pag. 10
Congratulations!
Thank you for choosing a Candy
appliance; quality dishwashers which
guarantee high performance and
reliability.
Candy manufacture a vast range
of domestic appliances: washing
machines, washer/dryers, cookers,
microwave ovens, ovens and hobs,
refrigerators and freezers.
Ask your dealer for the catalogue with
the complete range of Candy products.
Please read this booklet carefully as
it provides important information
regarding the safe installation, use,
and maintenance of the machine,
together with some useful advice on
how to achieve the best results from
your dishwasher.
For future reference please keep this
instruction booklet in a safe place.
CUSTOMER SERVICE AND
GUARANTEE
Your new appliance is fully guaranteed
by the manufacturer for 12 months
against electrical/mechanical break-
down excluding:
A. Any faults which occur due to bad
installation or misuse of the machine.
B. Any faults which occur due to repair
of, or interference with, the machine
by any person not authorised by the
manufacturer to carry out service.
C. Any faults which occur due to
any parts which are fitted to the
machine which are not the original
manufacturers parts.
D. Any faults arising from non-domestic
use or unusual or abnormal use of
the machine.
E. Any faults arising from operation at
incorrect voltage.
F. Any faults arising from incorrect
operation of the machine.
The guarantee applies to Gt Britain
and Northern Ireland only, and is an
addition to your statutory rights.
AFTER SALES SERVICE
For service and repairs call your local engineer on our national telephone number:
GIAS Service Tel: 08705 400 600
Support Service (Eire 018301 666)
23
EN 50242 place load
Capacity with pans and dishes
Water supply pressure
Fuse
Power input
Supply voltage
15
9 persons
Min. 0,08 - Max 0,8 MPa
(see rating plate)
(see rating plate)
(see rating plate)
DESCRIPTION OF THE CONTROL
TECHNICAL DATA:
DIMENSIONS:
Height
Depth
Width
Depth with door open
cm
cm
cm
cm
with working top
85
60
60
120
without working top
82
57,3
59,8
117
A"ON/OFF" button
B"ECO" button
C"PLUS" button
D"1/2 FLEXI" button
E"DELAY START" button
FOpen door
G "PROGRAMS" buttons
H "SALT EMPTY" light
I "RINSE AID EMPTY" light
L"PROGRAM STATUS" LEDs
M DIGITAL DISPLAY
N "PROGRAM SELECTION" LEDs
O "OPTION SELECTION" LEDs
B C D E F G
N
IL
HM
A
O
4
PROGRAM SELECTION
AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
Program settings
■Open the door and place dirty dishes
inside the appliance.
■Press the "ON/OFF" button .
■After pressing the "ON/OFF" button,
the LED for the factory set is
"recommended” (which is ideal for full
load daily use) or the LED for the "Auto’
Memory" program (see below) will blink.
The length of the program will be shown
on the display alternating hours with
minutes [I.e: 1 h (1 hour) / 25 (25 minutes)].
IMPORTANT
The dishwasher has two very practical
functions:
- the "recommended" program
( ) for quick and sure selection;
- the "Auto’ Memory", function which
saves a program used at least 3
times consecutively so that if you
regularly use the same washing cycle
each time you do not have to
continually set the program thereby
saving time and effort.
■To select an option, press the
corresponding button (the LED will turn on).
Option buttons must be pressed
BEFORE starting the program for
them to be accepted.
■To choose another program, press the
corresponding button (the relevant LED
will blink to confirm the selection).
■To start the program, press the selected
program button again to confirm. The
program starts automatically, the
relevant LED will stop blinking and
remain on and the cycle length will
appear on the display.
If the previously described operations
were performed with the door open, the
program will not start until the door is
closed.
“AUTOMATIC” programs
The dishwasher is equipped with a dirt
sensor, able to analyse water murkiness
during all "AUTOMATIC" program phases
(see program list); thanks to this sensor
the washing cycle parameters are automati-
cally adapted to the real quantity of dirt on
dishes. Thus excellent washing results are
guaranteed while optimising water and
energy consumption.
Program interruption
Opening the door when a program is
running is not recommended especially
during the main washing and final hot rinse
phases. However, if the door is opened
while a program is running (for example,
to add dishes) the machine stops
automatically and the display will flash the
remaining time before the end of the cycle.
Close the door, without pressing any
buttons. The cycle will start from where it
left off (if it is necessary, the appliance
will make a short thermal anti-shock
programme before).
IMPORTANT
A running program can be interrupted
without opening the door by pausing
the dishwasher.
To pause, hold the running program
button down for at least 2 seconds
and release when the corresponding
LED starts blinking.
Simply press the program button
again to restart the cycle from where
it left off (the LED will stop blinking
and remain on).
WARNING!
If you open the door during the
drying cycle, an audible audio signal
advises you that the drying cycle has
not yet completed.
5
Changing a running program
Proceed as follows to change or cancel a
running program:
■Hold down the current program button
(with the LED on) for at least 5 seconds.
All program LEDs will turn on for one
second. The running program will be
cancelled and the corresponding LED
will start to blink. The display will go
blank and the program end LED will turn
on in the display
■At this point a new program can be set.
IMPORTANT
If, when the program button is held
down, "00" blinks on the display, it
means that there is water in the
appliance.
Close the door (if open) and wait until
the dishwasher empties the water.
When empty a new program can be set.
WARNING!
Before starting a new programme,
you should check that there is still
detergent in the dispenser.
If necessary, top up the dispenser.
If there is any break in the power supply
while the dishwasher is operating, a
special memory stores the selected
programme and, when the power is
restored, it continues where it left off (if
it is necessary, the appliance will make
a short thermal anti-shock programme
before).
Program operations
When a program is running, the time until
the end of the cycle will be displayed and
the 4 “PROGRAM STATUS” LEDs:
= "WASH"
= "RINSE"
= "DRY"
= "END"
will light singularly and in sequence to
indicate the current phase
Program end
The display will go blank and the last
“PROGRAM STATUS” LED will light to
indicate that the cycle has ended.
A 5 second buzzer will sound (if not muted)
3 times at 30 second intervals to signal that
the program has ended. The program end
LED will light and the display will go blank.
Dishes can now be removed and the
dishwasher turned off by pressing the
"ON/OFF" button or dishes can be loaded
for a new cycle.
Option buttons
IMPORTANT
All options MUST be turned on or off,
BEFORE starting the program.
"ECO" button
The "ECO" button provides over 20% time
and energy savings by reducing the final
water heating and drying times during the
last rinse cycle.
This option is recommended for light soil
washes, and for when the dishes are not
required perfectly dry straight away.
If you want to get better drying, we advise
to leave the dishwasher door slightly ajar at
the end of the cycle, to allow for a natural
circulation of air inside the dishwasher.
"PLUS" button
The "PLUS" option always guarantees the
best results by more effectively dealing
with heavier soiling. By using this option,
the strength of the selected cycle will be
increased, adding one rinse and increasing
the temperature of the water in the washing
phase where foreseen.
This option is recommended for very dirty
dishes or when dirty dishes may not have
been pre-treated allowing the soiling to dry
up.

Termékspecifikációk

Márka: Candy
Kategória: mosogatógép
Modell: CDF 715T-16S

Szüksége van segítségre?

Ha segítségre van szüksége Candy CDF 715T-16S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mosogatógép Candy

Candy

Candy CI 7300 Útmutató

16 Január 2025
Candy

Candy CDCF 6 Útmutató

14 Január 2025
Candy

Candy CF 6C2FPX Útmutató

22 December 2024
Candy

Candy CIMC E0W 3E53 Útmutató

22 December 2024
Candy

Candy CDS250XPLAN Útmutató

16 Október 2024
Candy

Candy CDF615AX-84S Útmutató

9 Október 2024
Candy

Candy CDI 1020/P-01 Útmutató

5 Október 2024
Candy

Candy LSDSI71OALU Útmutató

30 Szeptember 2024
Candy

Candy CDI 2DS36-19 Útmutató

24 Szeptember 2024
Candy

Candy CDP 2L1147B-47 Útmutató

23 Szeptember 2024

Útmutatók mosogatógép

Legújabb útmutatók mosogatógép

Miele

Miele G 4485 Útmutató

10 Április 2025
Miele

Miele G 4940 SC Front Jubilee Útmutató

10 Április 2025
AEG

AEG Favorit R 3Prog Útmutató

9 Április 2025
Miele

Miele G 5432 SCU Útmutató

9 Április 2025
Miele

Miele G 5495 SCVi XXL Active Plus Útmutató

9 Április 2025
Oranier

Oranier GAVI 7592 XL Útmutató

9 Április 2025
Amica

Amica DIM44D6EBq Útmutató

9 Április 2025
Sharp

Sharp QW-I1GI47EX Útmutató

9 Április 2025
Beko

Beko BDFN26450XC Útmutató

8 Április 2025
Asko

Asko DFI544B Útmutató

8 Április 2025