Használati útmutató Canon Pixma Pro 100

Canon nyomtató Pixma Pro 100

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Canon Pixma Pro 100 (4 oldal) a nyomtató kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/4
1
XXXXXXXX © CANON INC. 2012
4
2
3
1
2
1
3
series Retire la cinta y los materiales de protección.
Conexión de red:
Prepare el cable Ethernet
o los dispositivos de red,
como el router o el punto de
acceso, según convenga.
Evite que caigan objetos dentro de la impresora. Podrían provocar fallos en el
funcionamiento.
No conecte aún el cable USB o
Ethernet.
Conecte el cable de alimentación.
33
Pulse el botón ACTIVADO (ON) y,
a continuación, compruebe que la
luz de se ENCENDIDO (POWER)
ilumina en blanco.
44
Si la luz de parpadea Alarma (Alarm)
en naranja, pulse el botón ACTIVADO
(ON) para apagar la impresora y repita
desde .
Cierre la tapa superior.
22
Preparativos
Elementos
suministrados
Abra la tapa superior, retire la cinta naranja y el material de protección.
¡Léame en primer lugar!
Consérvelo a mano para utilizarlo
como referencia en el futuro.
Guía de inicio
ESPAÑOL
Canon Inkjet Impresora
Ayuda de Canon
Asistencia técnica por correo electrónico:
www.usa.canon.com/support
Asistencia técnica gratuita: 1-800-OK-CANON
Esta opción proporciona asistencia telefónica técnica personal, sin
cargo por servicio, de lunes a viernes (excepto festivos), durante
el periodo de garantía.
Se dispone de un dispositivo telefónico auxiliar para sordos (TDD)
en 1-866-251-3752.
Número de modelo: K10377
Para llevar a cabo la instalación, coloque la impresora cerca del punto de acceso* y
del ordenador.
(* necesario para LAN inalámbrica)
Elección de una ubicación
Coloque la impresora sobre una superficie plana.
No coloque ningún objeto delante de la impresora.
Para abrir el soporte del papel y la bandeja de salida del papel, deje un espacio libre como se muestra en la figura.
Para mover la impresora son necesarias al menos dos personas.
10 pulgadas (25 cm)
17 pulgadas (43 cm)
Remove the tape and protective materials.
Network connection:
Prepare the Ethernet cable
or network devices such as a
router or an access point as
necessary.
Do not allow objects to fall inside the printer. These could cause malfunction.
Do not connect the USB or Ethernet
cable yet.
Connect the power cord.
33
Press the button, then check ON
that the lamp lights white.POWER
44
If the Alarm lamp ashes orange,
press the button to turn OFF the ON
printer, then redo from .
Close the Top Cover.
22
Preparation
Included Items
Open the Top Cover, then remove the orange tape and protective material.
Getting Started Read me rst!
Keep me handy for future reference.
ENGLISH
Canon Inkjet Printer
Getting Help from Canon
Email Tech Support — www.usa.canon.com/support
Toll-Free Tech Support— 1-800-OK-CANON
This option provides live telephone technical support, free of
service charges, Monday-Friday (excluding holidays), during the
warranty period.
Telephone Device for the Deaf (TDD) support is available at
1-866-251-3752.
Model Number: K10377
To perform setup, place the printer near the access point* and computer.
(* Required for wireless LAN)
Choosing a Location
Place the printer on a flat surface.
Do not place objects in front of the printer.
To open the Paper Support and Paper Output Tray, keep a space as shown in the figure.
It needs two persons to carry the printer.
10 inches (25 cm)
17 inches (43 cm)
QT5-5817-V01 PRINTED IN XXXXXXXX

Termékspecifikációk

Márka: Canon
Kategória: nyomtató
Modell: Pixma Pro 100

Szüksége van segítségre?

Ha segítségre van szüksége Canon Pixma Pro 100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek