Használati útmutató CDA KA72SS

CDA Mosogató KA72SS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CDA KA72SS (2 oldal) a Mosogató kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/2
www.cda.eu
Stainless Steel
Sinks
Installation
2
Installation
Before installation
Oer up the sink to the worktop and/or the cabinets to confirm that
the external dimensions of the bowls are compatible with the cabinets
themselves.
Confirm that with the sink in position:
 There is adequate space to install any taps or other required
accessories.
 There is adequate space to install the waste pipework and that any
necessary modification to internal shelves to accommodate the waste
(and trap) is acceptable.
 Access to any water stop-cock or other services will still be adequate
after the installation.
Installation
 Use the template included with the sink to mark out where the
worktop needs to be cut.
 After cutting out the worktop aperture, we recommend you seal the
cut edges with silicone (or similar) sealant to help prevent ingress of
water.
 Position the supplied gasket around the perimeter of the hole (Fig. 1).
 It is often easier to mount the taps,
waste-fitting and overflow onto the sink
prior to fitting the sink to the worktop.
Ensure that the external edge of the
sink is positioned on the gasket, to
create a barrier to the ingress of water
and other items between sink and
worktop.
Fig. 1

Termékspecifikációk

Márka: CDA
Kategória: Mosogató
Modell: KA72SS

Szüksége van segítségre?

Ha segítségre van szüksége CDA KA72SS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek