Használati útmutató CDA KA80SS

CDA Mosogató KA80SS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CDA KA80SS (2 oldal) a Mosogató kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/2
www.cda.eu
ka30, ka32,
ka80 and ka82
Stainless Steel
Sinks
Installation
2
Installation
Before Installation
Oer up the sink to the worktop and/or the cabinets to confirm that
the external dimensions of the bowls are compatible with the cabinets
themselves.
Confirm that with the sink in position:
 There is adequate space to install any taps or other required
accessories.
 There is adequate space to install the waste pipework and that any
necessary modification to internal shelves to accommodate the waste
(and trap) is acceptable.
 Access to any water stop-cock or other services will still be adequate
after the installation.
Installation
 Refer to the cut-out sizes on the back of this manual and use them
to mark out where the worktop needs to be cut. Double-check the
dimensions before cutting the worktop aperture.
 After cutting out the worktop aperture, we recommend you seal the
cut edges with silicone (or similar) sealant to help prevent ingress of
water.
 Position the supplied gasket around
the perimeter of the hole (Fig. 1).
 It is often easier to mount the taps,
waste-fitting and overflow onto the sink
prior to fitting the sink to the worktop.
Ensure that the external edge of the
sink is positioned on the gasket, to Fig. 1

Termékspecifikációk

Márka: CDA
Kategória: Mosogató
Modell: KA80SS

Szüksége van segítségre?

Ha segítségre van szüksége CDA KA80SS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek