Használati útmutató CDN SD1104

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CDN SD1104 (2 oldal) a konyhai mérleg kategóriában. Ezt az útmutatót 23 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.2 csillagra

Model: SD1104

Digital Scale

11 pounds/5 kilograms/176 ounces/5 liters

by pounds:ounces, uid ounces, grams and milliliters

Features

• Tare function

• Backlit display

• Stainless steel platform

• Selectable units

• Overload indication

• Battery status indication

• On/off button

• Auto-off after 60 seconds

• Mounting: hang

• Batteries and instructions included

Note: In the following instructions, names of the control

buttons are shown in CAPS. Function information that

appears on the display is shown in BOLD CAPS.

Battery Installation

Replace battery when LCD becomes dim. LO appears

on the display when battery status is low and needs to

be replaced.

1. Power off the unit before installing the battery.

2. Remove battery cover on the back by pressing

the latch in and lifting up.

3. Install three 1.5V AAA batteries observing

polarity shown in compartment.

4. Replace the battery cover until it clicks shut.

Operating Instructions

Place the scale gently on a hard and at surface and

make sure it is steady before use to obtain accurate

measurements.

A. On/Off

1. Press the ON/TARE button to turn on.

2. Press the ON/TARE button for 2 seconds to turn off.

B. Auto Off

The scale automatically turns off after 30 seconds

of inactivity.

C. Unit Selection

Press the UNIT button to select the desired unit.

The display cycles through g, .oz, lb:oz and ml.

D. Tare

The tare function resets the scale display to zero

in order to measure only the weight of an item. It is

frequently used to subtract the weight of containers.

1. When the scale is on, place a container on

the platform.

2. Gently press the ON/TARE button to reset the

display to zero. TARE appears on the left of the

display and 0:0.0 oz appears in the main area of

the display.

3. Place the item into the container or directly on

the scale platform. The weight of only the last

item added will appear on the display.

4. Continue to repeat steps 2 and 3 to measure

the respective weights of additional items. When

all the items are removed from the platform, the

total weight of all items appears on the display.

5. To clear the tare, remove all items from the

platform and gently press the ON/TARE button.

TARE disappears from the left of the display and

0:0.0 oz appears in the main area of the display.

E. Error Messages

1. EEEE indicates an overload when the item being

measured exceeds the capacity of the scale.

Immediately remove the overweight item to avoid

causing damage to your scale.

Note: Clean the scale platform before each use.

Termékspecifikációk