Használati útmutató Chauvet COLORdash Batten-Quad 12
Chauvet
nincs kategorizálva
COLORdash Batten-Quad 12
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chauvet COLORdash Batten-Quad 12 (36 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/36
Quick Reference Guide
English EN
Español ES
Français FR
Nederlands NL
COLORdash Batten- Quad 12 QRG EN
2
About this
Guide
The COLORdash Batten- Quad 12 Quick Reference Guide (QRG) has basic
product information such as connection, mounting, menu options, and DMX
values. Download the User Manual from www.chauvetprofessional.com
for
more details.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
Safety Notes
• DO NOT open this product. It contains no user- serviceable parts.
• DO NOT look at the light source when the product is on.
• To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it.
• CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation
may form on the internal electronics of the product. To avoid causing a
failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
• CAUTION: This product’s housing hot when lights are may be
operating.
• Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
• USE a safety cable when mounting this product overhead.
• DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it. (IP20)
• DO NOT operate this product if the housing, lenses, or cables appear
damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate
this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your
distributor to request support or return a product. Visit
www.chauvetlprofessional.com for contact information.
What Is
Included
• COLORdash Batten- Quad 12
• Power Input Cord
• 2 Trunnion
• Warranty Card
• Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods of
non-
use completely disconnect the product from power via breaker or by
unplugging it.
Power Linking
You can link up to 9 - COLORdash Batten Quad 12 products at 120 VAC or 17
at 230 VAC. Never exceed this number. Power linking cords can be purchased
separately.
COLORdash Batten- Quad 12 QRG EN
3
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The COLORdash Batten- Quad 12 will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com.
DMX Connection
The COLORdash Batten-Quad 12 uses a regular DMX data connection for its
DMX personalities: 4 Ch, , 6 Ch, 10 Ch 48 Ch, and 52 Ch
. See the User
Manual to connect and configure for DMX operation.
Master/Slave
Connection
The COLORdash Batten-Quad 12 uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Mounting
Before mounting this product, read the Safety Notes. Make sure the mounting
clamp is capable of supporting the weight of the product. For our Chauvet line
of mounting clamps, go to trusst.com/productcategory/base- -plates accessories-
clamps/.
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Overhead Mounting
Floor Mounting
Mounting
Clamp
Safety
Cable
Termékspecifikációk
| Márka: | Chauvet |
| Kategória: | nincs kategorizálva |
| Modell: | COLORdash Batten-Quad 12 |
Szüksége van segítségre?
Ha segítségre van szüksége Chauvet COLORdash Batten-Quad 12, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Chauvet
5 Január 2025
5 Január 2025
19 December 2024
19 December 2024
19 December 2024
19 December 2024
19 December 2024
19 December 2024
1 Szeptember 2024
1 Szeptember 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Rosseto
- nincs kategorizálva Braun Phototechnik
- nincs kategorizálva IFootage
- nincs kategorizálva Namco Bandai Games
- nincs kategorizálva Sureguard
- nincs kategorizálva APSystems
- nincs kategorizálva Micsig
- nincs kategorizálva Thorens
- nincs kategorizálva Blaupunkt
- nincs kategorizálva Cotek
- nincs kategorizálva Learning Resources
- nincs kategorizálva Duromax
- nincs kategorizálva Sanli
- nincs kategorizálva Pentatech
- nincs kategorizálva BWT
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025