Használati útmutató Chicco KeyFit 35 SoftGoods Removal

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chicco KeyFit 35 SoftGoods Removal (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.2 csillagra

WARNING: Avoid serious injury or death to your child. Never

use your KeyFit 35 Child Restraint without the softgoods in place.

You must read and understand the Softgood Removal instructions

and the instructions in the User Guide. If you do not understand

these instructions, DO NOT attempt to remove the softgoods,

STOP and call Chicco at 1-877-424-4226.

INSTRUCTIONS:KeyFit 35 Softgood Removal

IMPORTANT: Please also refer to the instructions that came with your product.

Rotate the Carry Handle up into the carry position.To remove the Canopy, unhook the Elastic Straps on both sides,

below the Carry Handle hub. Undo both Toggles on the back of the Child Restraint. On one side of the Canopy, press the

button on the Canopy Mount and pull out the bow. Repeat for the other side of the Canopy and remove. Then rotate the

Carry Handle back into stationary position.

Refer to User Guide if needed.

1

Press the Harness Adjuster Button and loosen the

Harness Straps. Undo the buckle and chest clips.

2

Remove the optional Head Rest Insert and Newborn

Positioner.

Refer to User Guide if needed.

4

Remove the Crotch Strap Pad by pushing the fabric Tab

through the slot on the BACK of the Harness Buckle. Then

pull Tab out of the FRONT and remove Crotch Strap Pad.

IMPORTANT! If Crotch Strap Pad prevents harness from properly

fitting small Infant, it should be removed.

3

1

SS0030E_01

Remove both Shoulder Pads.

Undo the hook and loop

sections located on the outside seam of the Shoulder Pad.

5

Termékspecifikációk