Használati útmutató Chief FSA1015B

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief FSA1015B (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8804-000307
©2006 Chief Manufacturing
www.chiefmfg.com
03/06
BEFORE YOU BEGIN
19" EQUIPMENT RACK ACCESSORY
Model: FSA-1015
Specifications:
Designed for equipment rack with 19" wide
vertical attach rails.
Accommodates the following installation
configurations:
- Direct installation of VESA compliant
display/interface (75x75mm, 100x100mm,
and 100x200mm)
- FWD Cynergy Wall Mount
- FSR and FTR Fusion Wall Mounts
Weight capacity of 30 lbs (13 kg).
FSA-1015
(Shown with optional Equipment Rack,
FTR, and FWD mounts)
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using
the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty.
If you have any questions about this these instructions or your specific installation, contact Chief Manufacturing
at 1-800-582-6480 or 952-894-6280.
Model: FSA-1015 Installation Instructions
2
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to make sure the structure to which this component is
attached can support five times the combined weight of all equipment. Reinforce the structure as required before
installing the component.
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of all components attached to the FSA-1015, including the
mount (if required) and display, does not exceed 30 lbs (13 kg).
DIMENSIONS
Installation Instructions Model: FSA-1015
3
TOOLS REQUIRED FOR INSTALLATION
#2 Phillips Screwdriver
7/16" Wrench (for installation of existing FWD
Wall Mount)
NOTE: Other tools may be required depending on your
method of installation.
PARTS
After unpacking carton, inspect and verify contents (See
Figure 1). If any listed parts are missing or damaged,
contact Chief Customer Service at 1-800-582-6480.
Figure 1: Parts
Table 1: Parts
Item Description Qty
10 BRACKET, Display Mounting 1
20 BRACKET, Side 2
30 SCREW, Phillips Pan Machine, #10-32 x 1/2" 4
40 SCREW, Phillips Pan Machine, #12-24 x 1/2" 4
50 SCREW, Phillips Pan Machine, #10-24 x 1/2" 8
60 SCREW, Phillips Pan Machine, #10-24 x 1-1/4" 2
70 NUT, Nylock, Short, #10-24 4
80 BRACKET, FWD Wall Mount 1
90 SCREW, Phillips Pan Machine, M4 x 12mm 6
100 SCREW, Phillips Pan Machine, M4 x 20mm 6
110 SCREW, Phillips Pan Machine, M4 x 30mm 6
120 SPACER, Nylon, 3/8" 6
130 SPACER, Nylon, 3/4" 6
10
20
30
40
60
70
80
100
50
90
110
120
BAG "A"
BAG "B"
BAG "C"
BAG "D"
130

Termékspecifikációk

Márka: Chief
Kategória: nincs kategorizálva
Modell: FSA1015B

Szüksége van segítségre?

Ha segítségre van szüksége Chief FSA1015B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Chief

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025