Használati útmutató Chief HB74P
Chief
Projektor tartozék
HB74P
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief HB74P (2 oldal) a Projektor tartozék kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.3 csillagra
Oldal 1/2
I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
document.
© 2008 Chief Manufacturing, 8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8803-000114
5/28/08
MODEL: HB-74P Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative by calling
1-800-582-6480.
PARTS
Figure 1:
INSTALLATION
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1. Place four nylon spacers on top of projector.
2. Lower custom HB bracket onto spacers on top of projector. Ensure that the side hooks open towards back of the projector. (See Figure 1)
3. Attach HB bracket to projector using four M6 x 16mm Phillips flat head screws through nylon spacers. (See Figure 1)
Continued...
(1) BRACKET, Custom HB (4) NUT, Flange, Hex, 5/16-18
(4) SCREW, Phillips Flat Head, M6 x 16mm (4) SPACER, Nylon .50 x .260 x .1875
x 4
x
x 4
x
1
2
Toward front
of projector
I N S T A L L A T I O N I N S T R U C T I O N S
Continued...
CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is
recommended.
Figure 2:
4. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.
5. With help of assistants, lift the projector and install it to the four studs extending from the VCM housing. Ensure that the VCM housing is
seated in slots on HB bracket. (See Figure 2)
6. Tighten the four 5/16" flange nuts. (See Figure 2)
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
4
5
VCM Housing
x 4
Seat VCM in HB
bracket slots
Termékspecifikációk
| Márka: | Chief |
| Kategória: | Projektor tartozék |
| Modell: | HB74P |
Szüksége van segítségre?
Ha segítségre van szüksége Chief HB74P, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Projektor tartozék Chief
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
1 Január 2025
Útmutatók Projektor tartozék
- Projektor tartozék Peerless
- Projektor tartozék Unicol
- Projektor tartozék Sanyo
- Projektor tartozék BenQ
- Projektor tartozék Da-Lite
- Projektor tartozék Konig & Meyer
- Projektor tartozék My Wall
- Projektor tartozék Christie
- Projektor tartozék AV:link
- Projektor tartozék Metronic
- Projektor tartozék Vogel's
- Projektor tartozék Tempest
- Projektor tartozék Sony
- Projektor tartozék Peerless-AV
- Projektor tartozék Elite Screens
Legújabb útmutatók Projektor tartozék
27 Március 2025
27 Március 2025
14 Január 2025
10 Január 2025
7 Január 2025
27 December 2024
27 December 2024
23 December 2024
23 December 2024
23 December 2024