Használati útmutató Chief KSA1005B
Chief
Lapos panel támogatás
KSA1005B
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief KSA1005B (1 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 3.7 csillagra
Oldal 1/1

8804-000133 Rev. D 09/07/05
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
INSTALLATION INSTRUCTIONS
FSA-1005 and KSA-1005
FLAT PANEL DISPLAY SECURITY KIT
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(4) Security Pivot Bolt, 4” (4) M4 x 12mm Security Screw
(1) ¼-20 x .25” Security Screw (4) M4 x 20mm Security Screw
(1) ¼-20 x .625” Set Screw (1) 1/8” Hex Key
(1) 5/16-18 x .75” Security Set Screw (1) 5/32” Security Hex Key
(1) 3/16” Security Hex Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
FLAT PANEL DISPLAYS ARE EXTREMELY FRAGILE.
Note: In some installations (i.e. single arm mount) not all fasteners included in this kit will be required.
1. Remove and replace existing fasteners on small flat panel mount (dual arm assembly shown for reference) with
tamper-resistant fasteners (see Figure 2).
Note: There are two possible wall plates with different security requirements.
Option I: If your wall plate uses a ¼-20 setscrew, replace it using the ¼-20 x .625” setscrew. The existing setscrew in
the wall plate is too long to be used in conjunction with the ¼-20 x .25” security screw.
Option II: If your wall plate uses a 5/16-18 set screw, replace the setscrew with the security version included in this kit.
Note: In some installations (i.e. single arm mount) not all fasteners included in this kit will be required.
CAUTION!
Figure 1
Figure 2
4”
Swing Arm Models
Termékspecifikációk
Márka: | Chief |
Kategória: | Lapos panel támogatás |
Modell: | KSA1005B |
Szüksége van segítségre?
Ha segítségre van szüksége Chief KSA1005B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lapos panel támogatás Chief
3 Április 2025
3 Április 2025
3 Április 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
29 December 2024
29 December 2024
Útmutatók Lapos panel támogatás
- Lapos panel támogatás Peerless
- Lapos panel támogatás Pyle
- Lapos panel támogatás Siig
- Lapos panel támogatás Crimson
- Lapos panel támogatás NeoMounts
- Lapos panel támogatás Reflecta
- Lapos panel támogatás Insignia
- Lapos panel támogatás Hitachi
- Lapos panel támogatás CTA Digital
- Lapos panel támogatás Iiyama
- Lapos panel támogatás Icy Box
- Lapos panel támogatás Elite Screens
- Lapos panel támogatás Ewent
- Lapos panel támogatás Bretford
- Lapos panel támogatás Digitus
Legújabb útmutatók Lapos panel támogatás
8 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025