Használati útmutató Chief MCD6301
Chief
Lapos panel támogatás
MCD6301
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief MCD6301 (4 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
Medium Flat Panel Interface Bracket
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
MSB-6301
MSB-6301 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
may have a maximum drywall thickness of 5/8" (1.6cm).
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the maximum weight
installed on the interface bracket doesn’t exceed 125 lbs
(56.7 kg).
DIMENSIONS
Installation Instructions MSB-6301
3
TOOLS / PARTS FOR INSTALLATION
ASSEMBLY AND INSTALLATION
NOTE: For use with VESA 100mm x 100mm mountable flat
screens.
1. Insert four #10-24 x 1/2" button head cap screws (C)
through holes on back side of bracket and into four
mounting buttons (D) with chamfered hole of mounting
button (larger surface) facing bracket. Tighten until buttons
are fully secured to bracket. (See Figure 1)
Figure 1
2. Attach bracket to back of display by inserting four
M4 x 20mm Phillips head screws (E) through interface
bracket (A), four nylon spacers (F) and holes on back of
display. (See Figure 2)
NOTE: The vertical slots in bracket may be used for any
necessary height adjustment.
Figure 2
3. Complete the installation following the mount installation
instructions.
1/8"
A (1)
[Interface
Bracket]
D (4)
C (4)
[mounting button]
#10-24 x 1/2"
E (4)
F (4)
.50 x .218 x .25
B (1)
1/8" (included)
M4 x 20mm
(D) x 4
1
(A)
(C) x 4
2
(E) x 4
(F) x 4
(A)
Display
Termékspecifikációk
| Márka: | Chief |
| Kategória: | Lapos panel támogatás |
| Modell: | MCD6301 |
Szüksége van segítségre?
Ha segítségre van szüksége Chief MCD6301, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lapos panel támogatás Chief
3 Április 2025
3 Április 2025
3 Április 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
29 December 2024
29 December 2024
Útmutatók Lapos panel támogatás
- Lapos panel támogatás NEC
- Lapos panel támogatás Panduit
- Lapos panel támogatás Hitachi
- Lapos panel támogatás 3M
- Lapos panel támogatás Pyle
- Lapos panel támogatás SmartMetals
- Lapos panel támogatás HP
- Lapos panel támogatás Equip
- Lapos panel támogatás Sven
- Lapos panel támogatás SMS Smart Media Solutions
- Lapos panel támogatás Multibrackets
- Lapos panel támogatás Zaor
- Lapos panel támogatás Steren
- Lapos panel támogatás Insignia
- Lapos panel támogatás Vogel's
Legújabb útmutatók Lapos panel támogatás
8 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025