Használati útmutató Chief PDC2244
Chief
Lapos panel támogatás
PDC2244
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief PDC2244 (2 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.3 csillagra
Oldal 1/2

I N S T A L LA T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC. 8804-000302 REV. E
1-800-582-6480 952-894-6280 FAX 952-894-6918 2008 Chief Manufacturing
8401 EAGLE CREEK PKWY, STE. 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 2/08
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 1
75
POUNDS (
79.38
KG).
PSB-2244
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Plasma Upright Brackets (2) Plasma Top/Bottom Bracket
(4) Mounting Button - Tapped (8) 10-24 x .5 Button Head Cap Screw
(4) M10 x 50mm Hex Head Cap Screw (4) M15 x M10.4 x M20 Nylon Spacer
(4) .750 x .390 x 1.00 Nylon Spacer (1) Wrench, Hex, 17mm
(1) 1/8 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to upright brackets (four places) (see
Figure 2 & Figure 3).
CAUTION!
Figure 1
WARNING!
Figure 2 Figure 3

2. Using four 10-24 button head cap screws, attach uprights to top/bottom brackets (see Figure 4 &
Figure 5).
3. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display
using M10 screws (see Figures 6 & Figure 7). Use the nylon spacer that works best for your screen.
4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely
engaged.
Figure 4 Figure 5
Figure 6 Figure 7
Termékspecifikációk
Márka: | Chief |
Kategória: | Lapos panel támogatás |
Modell: | PDC2244 |
Szüksége van segítségre?
Ha segítségre van szüksége Chief PDC2244, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lapos panel támogatás Chief
3 Április 2025
3 Április 2025
3 Április 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
29 December 2024
29 December 2024
Útmutatók Lapos panel támogatás
- Lapos panel támogatás Wentronic
- Lapos panel támogatás Reflecta
- Lapos panel támogatás Peerless
- Lapos panel támogatás SilverStone
- Lapos panel támogatás Ultimate
- Lapos panel támogatás V7
- Lapos panel támogatás Acco
- Lapos panel támogatás Digitus
- Lapos panel támogatás Nabo
- Lapos panel támogatás Da-Lite
- Lapos panel támogatás Helder
- Lapos panel támogatás NeoMounts
- Lapos panel támogatás Atdec
- Lapos panel támogatás BenQ
- Lapos panel támogatás B-tech
Legújabb útmutatók Lapos panel támogatás
8 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025