Használati útmutató Chief PST2000B
Chief
Lapos panel támogatás
PST2000B
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chief PST2000B (8 oldal) a Lapos panel támogatás kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/8
Chief Manufacturing, a division of Milestone AV Technologies 8804-000255 Rev F
8401 Eagle Creek Parkway, Savage, MN 55378 ©2008 Milestone AV Technologies
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918 10/08
I N S T A LL A T IO N IN S T R U C T IO N S
LARGE FLAT PANEL DISPLAY STATIC MOUNT
PST 2000 Series
The PST static wall mount accommodates large flat
screens weighing up to 200 lbs (90.72kg). The teardrop
holes in the mount allow for quick connect/disconnect of
the screen, thus simplifying installation and maintenance
processes.
The top and bottom mounting brackets are adaptable to
supporting framework with wood studs that are 16” on
center or 24”on center.
The mount has integrated lateral shift, allowing for four
different mounting options. For dual wood studs 16” on
center, the lateral shift is + 4.5 inches. For dual wood
studs 24” on center, the lateral shift is + 0.5 inches.
After installing the flat screen on the mount, the screen
can be locked in place using the convenient locking flag.
A padlock can be used on the latching flag for added
security.
The mount is concealed behind the display, making it a
low profile wall mount.
! IMPORTANT: If the installation of this product
requires OSHPD seismic approval, refer to OSHPD
pre-approval documents and drawings before beginning
installation. OSHPD documents and drawings are
available at www.chiefmfg.com, and located on the
product information page for the mount. PST 2000 Series
BEFORE YOU BEGIN
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-
tion to the “Important Warnings and Cautions” on Page 2.
The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the
mount must be capable of supporting five times the total weight of the equipment.
The maximum weight to be installed on the PST mount is 200 lbs (90.72kg).
Installation Instructions PST 2000 Series
2
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the
instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING Improper installation can result in serious personal injury! Make sure that the mounting surface
can support a redundant weight factor five times the total weight of the equipment: if not, reinforce
the structure before installing the mount.
WARNING Be aware of the potential for personal injury or damage to the unit if it is not adequately mounted.
WARNING The installer is responsible for verifying that the wall to which the mount is anchored will safely
support the combined load of all attached components or other equipment.
WARNING The weight of the large flat screens must not exceed 200 lbs (90.72kg), the maximum load capacity
of the mount.
WARNING Watch for pinch points. Do not put your fingers between movable parts.
WARNING Make sure the flag securing the display is fully raised at all times except when removing or
installing the display. The flag must be fully raised when installing/removing cables.
CAUTION Inspect the unit for shipping damage before you begin the installation.
DIMENSIONAL DRAWING
Installation Instructions PST 2000 Series
3
CONTENTS
DIMENSIONAL DRAWING ..................................... 2
TOOLS REQUIRED FOR INSTALLATION.............. 3
PARTS LIST .............................................................. 3
PST INSTALLATION................................................ 4
Select Mounting Location........................................ 4
Flag Extender Installation (OPTIONAL).................. 4
Mount the PST ........................................................ 5
ATTACH PSB TO THE DISPLAY............................. 6
INSTALL THE DISPLAY.......................................... 6
REMOVE THE DISPLAY.......................................... 6
TOOLS REQUIRED FOR
INSTALLATION
Drill and drill bit set
Socket wrench set
#2 Phillips Screwdriver
NOTE: Other tools may be required depending on your
method of installation.
Figure 1. Parts
PARTS LIST
Prior to assembly, unpack the carton completely. Verify
contents listed in Table 1 and Figure 1.
Read installation instructions completely. If you are
missing any of the listed parts, contact Customer Service
at: 1-800/582-6480.
Table 1. Parts List
REF DESCRIPTION QTY
10 Plasma Static Mount 1
20 Flag Extender 2
30 Phillips Machine Screw, 10-24 x ½” 2
40 Thin Nylock Nut, 10-24 2
50 Lag Bolts, 5/16” x 2-½” 4
60 Flat Washer, 5/16” 4
4 Lag Bolts
50
4 Washers
60
10 40
30
20
Termékspecifikációk
| Márka: | Chief |
| Kategória: | Lapos panel támogatás |
| Modell: | PST2000B |
Szüksége van segítségre?
Ha segítségre van szüksége Chief PST2000B, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Lapos panel támogatás Chief
3 Április 2025
3 Április 2025
3 Április 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
16 Január 2025
29 December 2024
29 December 2024
Útmutatók Lapos panel támogatás
- Lapos panel támogatás Abus
- Lapos panel támogatás Premier
- Lapos panel támogatás HQ
- Lapos panel támogatás Peerless
- Lapos panel támogatás Icy Box
- Lapos panel támogatás Luxor
- Lapos panel támogatás Kensington
- Lapos panel támogatás Vogel's
- Lapos panel támogatás Wentronic
- Lapos panel támogatás One For All
- Lapos panel támogatás Walker Edison
- Lapos panel támogatás NeoMounts
- Lapos panel támogatás Metronic
- Lapos panel támogatás Equip
- Lapos panel támogatás Sven
Legújabb útmutatók Lapos panel támogatás
8 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025