Használati útmutató Chord Ultima Pre 2
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chord Ultima Pre 2 (3 oldal) a Vevő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/3
Connecting ULTIMA PRE 2 to a power amplifier 4.0
To connect ULTIMA PRE 2 to your power amplifier, choose either XLR
or RCA.
It is important to know that if you are using the volume dial or modifying
the balance on ULTIMA PRE 2, it will only eect this output.
Chord Electronics
ULTIMA PRE 2 | Quickstart Manual
The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB, United Kingdom
info@chordelectronics.co.uk
chordelectronics.co.uk
Quickstart Manual
Introduction 1.0
Welcome to the ULTIMA PRE 2 Quickstart Guide. This shortened guide
is supplementary to the main manual which should be referred to for
full safety and operational information.
Please note, more information on any of these topics is listed within the
full manual found under the product page:
chordelectronics.co.uk/product/ultima-pre2
Warranty 1.1
The ULTIMA PRE 2 comes with a comprehensive 5-year warranty.
To activate the warranty, please register your device via the Chord
Electronics website:
chordelectronics.co.uk/register-product
Connecting ULTIMA PRE 2 to a source 3.0
First, you must ensure that ULTIMA PRE 2, and any connecting
equipment, is turned o.
You can connect ULTIMA PRE 2 to a source using any of the
highlighted inputs shown below.
Please note that each input is arranged as a stereo pair, right and then
left which is indicated on the furthermost sides of the inputs. Later,
when you come to switch ULTIMA PRE 2 on, each pair of inputs will
be shown as ‘LINE ’ on the display. LINE 1-4 begins with the pairs of X
XLRs and LINE 5, 6, T1 and T2 is the RCA pair next to these and so on.
Note that the connectors on the right hand side of the unit are
outputs and bypass ports. You must not connect any inputs here.
Balanced
input 1-4
Unbalanced
line 5-8
XLR and
RCA
outputs
Please ensure there is sucient ventilation around ULTIMA PRE 2 at
all times. Avoid placing ULTIMA PRE 2 in enclosed spaces, on soft
surfaces, near sources of heat and never cover its ventilation holes. For
optimum operation and ventilation leave some space around the unit.
Placement 2.0
Chord Electronics
ULTIMA PRE 2 | Quickstart Manual
The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB, United Kingdom
info@chordelectronics.co.uk
chordelectronics.co.uk
Quickstart Manual
Powering up ULTIMA PRE 2 7.0
Now that the system is connected you must ensure that the volume
control is set to the minimum and that nothing is playing. Then, switch
on any sources before ULTIMA PRE 2 and then finally your amplifier.
This sequence should always be followed to protect connected
devices. Slowly increase the voume to a comforable level.
Volume and balance control 9.0
Now that you have successfully completed the setup of your ULTIMA
PRE 2 we advise that you register your product with us. Registering
helps us give you the best possible support and protects your
investment:
Product registration 10.0
chordelectronics.co.uk/register-product/
Navigating the menu 8.0
To assign the main output with a particular input signal, press the A
button several times to cycle through the 7 options and select the
desire input.
Once all audio inputs and outputs are correctly connected and carefully
checked please connect the power cable to ULTIMA PRE 2.
Connecting ULTIMA PRE 2 to power 6.0
On your source commence playback and, using the left-hand dial,
slowly increase the volume of ULTIMA PRE 2, to a safe listening level.
The dial on the right adjusts balance. Typically, this should remain in
the centre of its rotation for balanced sound between the left and right
outputs, however if you require finer adjustment then ULTIMA PRE 2
accommodates.
Connecting ULTIMA PRE 2 to heaphones 5.0
If you want to use the ULTIMA PRE 2 with headphones, it features two
1/4 inch headphone sockets on the front panel. Headphone mode does
not automatically mute your loudspeakers, so ensure your amplifier is
turned o when using this mode.
Headphone
inputs
Termékspecifikációk
| Márka: | Chord |
| Kategória: | Vevő |
| Modell: | Ultima Pre 2 |
Szüksége van segítségre?
Ha segítségre van szüksége Chord Ultima Pre 2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Vevő Chord
14 Október 2024
10 Szeptember 2024
3 Szeptember 2024
28 Augusztus 2024
26 Augusztus 2024
26 Augusztus 2024
26 Augusztus 2024
20 Augusztus 2024
18 Augusztus 2024
9 Augusztus 2024
Útmutatók Vevő
- Vevő AKAI
- Vevő Audient
- Vevő Yamaha
- Vevő Denson
- Vevő Kogan
- Vevő Brigmton
- Vevő Amplicom
- Vevő Devolo
- Vevő Memphis Audio
- Vevő Camille Bauer
- Vevő PTN-electronics
- Vevő Bang & Olufsen
- Vevő Krüger&Matz
- Vevő JVC
- Vevő Dynacord
Legújabb útmutatók Vevő
9 Április 2025
9 Április 2025
5 Április 2025
5 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
31 Március 2025
31 Március 2025
30 Március 2025