Használati útmutató Cocraft HC 1400

Cocraft Fűrészgép HC 1400

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cocraft HC 1400 (22 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/22
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important:
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
HC1400
INTEGRATED SPINDLE LOCK
1400 W
18-3633 • 41-1475
CIRCULAR SAW
CIRKELSÅG SIRKELSAG
PYÖRÖSAHA KREISSÄGE
Ver. 20171215
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
18-3633 PSC185G
41-1475 PSC185G
ENGLISH
2
HC 1400 Circular Saw
Art.no 18-3633 Model PSC185G
41-1475 PSC185G
Please read theentire instruction manual before use and then save it for future
reference. Wereserve theright for any errors in text or images and any necessary
changes made to technicaldata. Intheevent of technical problems or other queries,
please contact our Customer Services (see address details on theback).
Safety
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow
thewarnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Theterm ”power tool” in thewarnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) powertool.
1) Work area safety
a) Keep work area clean and welllit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in thepresence
of flammable liquids, gases ordust. Powertools create sparks which may ignite
thedust orfumes.
c) Keep children and bystanders away while operating apowertool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match theoutlet. Nevermodify theplug in anyway.
Donot use any adapter plugs with earthed (grounded) powertools.
Unmodified plugs and matching outlets will reduce risk of electricshock.
b) Avoid body contact with grounded surfaces, such as pipes, radiators, ranges
and refrigerators. Thereis anincreased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Waterentering apower
tool will increase therisk of electricshock.
d) Do not abuse thecord. Neveruse thecord for carrying, pulling or unplugging
thepowertool. Keepcord away from heat, oil, sharp edges or movingparts.
Damaged or entangled cords increase therisk of electricshock.
e) When operating apower tool outdoors, use anextension cord suitable for
outdooruse. Useof acord suitable for outdoor use reduces therisk of electricshock.
f) If operating apower tool in adamp location is unavoidable, use aresidual current
device (RCD) protected supply. Useof anRCD reduces therisk of electricshock.
ENGLISH
3
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating
apowertool. Donot use apower tool while you are tired or under
theinfluence of drugs, alcohol or medication. Amoment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure theswitch is in theoff-position before
connecting to power source and/or battery pack, picking up or carrying
thetool. Carrying power tools with your finger on theswitch or energising power
tools that have theswitch on invites accidents.
d) Remove any adjusting key or wrench before turning thepower toolon.
Awrench or akey left attached to arotating part of thepower tool may result in
personal injury.
e) Do not overreach. Keepproper footing and balance at alltimes. Thisenables
better control of thepower tool in unexpected situations.
f) Dress properly. Donot wear loose clothing or jewellery. Keepyour hair, clothing
and gloves away from movingparts. Looseclothes, jewellery or long hair can be
caught in movingparts.
g) If devices are provided for theconnection of dust extraction and collection
facilities, ensure these are connected and properlyused. Useof dust collection
can reduce dust-related hazards.
4) Power tool use and care
a) Do not force thepowertool. Usethecorrect power tool for your application.
Thecorrect power tool will do thejob better and safer at therate for which it was designed.
b) Do not use thepower tool if theswitch does not turn it on andoff. Anypower
tool that cannot be controlled with theswitch is dangerous and must be repaired.
c) Disconnect theplug from thepower source and/or thebattery pack from
thepower tool before making any adjustments, changing accessories, or
storing powertools. Suchpreventive safety measures reduce therisk of starting
thepower tool accidentally.
d) Store idle power tools out of thereach of children and do not allow persons
unfamiliar with thepower tool or these instructions to operate thepowertool.
Powertools are dangerous in thehands of untrainedusers.
e) Maintain powertools. Checkfor misalignment or binding of moving parts,
breakage of parts and any other condition that may affect thepower tool’s
operation. Ifdamaged, have thepower tool repaired beforeuse.
Many accidents are caused by poorly maintained powertools.

Termékspecifikációk

Márka: Cocraft
Kategória: Fűrészgép
Modell: HC 1400

Szüksége van segítségre?

Ha segítségre van szüksége Cocraft HC 1400, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép Cocraft

Cocraft

Cocraft PRO RT18-PL Útmutató

12 Január 2025
Cocraft

Cocraft HB 10-L Útmutató

25 Augusztus 2024
Cocraft

Cocraft HL6.5T Útmutató

14 Augusztus 2024
Cocraft

Cocraft PRO RL1100-T Útmutató

13 Augusztus 2024
Cocraft

Cocraft HB 380-4T Útmutató

13 Augusztus 2024
Cocraft

Cocraft HCI 2400-T Útmutató

13 Augusztus 2024
Cocraft

Cocraft HB430-2T Útmutató

9 Augusztus 2024
Cocraft

Cocraft LXC CS18 Útmutató

7 Augusztus 2024
Cocraft

Cocraft PRO Edition JL750-P Útmutató

6 Augusztus 2024
Cocraft

Cocraft HR 850-T Útmutató

6 Augusztus 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Bavaria By Einhell

Bavaria By Einhell BHS 66 Útmutató

3 Április 2025
Bavaria By Einhell

Bavaria By Einhell BPS 600 E Útmutató

3 Április 2025
Makita

Makita DCS4610 Útmutató

2 Április 2025
Makita

Makita DPC6430 Útmutató

1 Április 2025
Makita

Makita DCS431 Útmutató

1 Április 2025
Makita

Makita DCS430 Útmutató

1 Április 2025
Makita

Makita EK6101 Útmutató

1 Április 2025
Makita

Makita DCS6401 Útmutató

1 Április 2025
Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025