Használati útmutató COLBOR CL100
COLBOR
Megkönnyebbülés
CL100
Olvassa el alább 📖 a magyar nyelvű használati útmutatót COLBOR CL100 (2 oldal) a Megkönnyebbülés kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 9.5 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/2

SET RATE EFF CCT
POWER
CL100
Video Light
User Manual
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Caring For Your COLBOR Product
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
The product is not waterproof.
Do not leave the product unattended while in use. Keep out of reach of
children.
Must remove the COB protective cover before use.
Do not handle with wet hands. Do not touch hot COB surface.
Please do not block the ventilation and do not look at the light directly when
it is on.
Do not attempt to disassemble or modify the product. Doing so voids
warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Disconnect from the power supply when it is not in use.
Malfunction may be caused by dropping, impact of external force.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Product Instructions
① Bowens Mount Release Latch
② LED Display Screen
③ Settings Button
④ EFF Rate Option Button
⑤ Adjustment Dial
⑥ EFF Mode Button
⑦ CCT Mode / Power Button
⑧ Power Input
⑨ Umbrella Lock
⑩ Umbrella Input
⑪ Light Base Lock
⑫ Light Base
⑬ Direction Adjusting Handle
Operation Instructions
After selecting wireless connection in Settings menu, the
icon will be displayed dynamically.
The icon is always on to indicate successful pairing with
mobile APP.
The icon disappears to indicate mobile APP pairing
failure, or the product is unpaired.
Smart Mode. The product will adjust the fan speed
according to the internal detected temperature to ensure
that it is in optimal working condition.
Status Icon Description
1. Connect the power cord with the power adapter, plug the connector of
adapter into the xture’s Power Input
2. Plug it into an electricity supply
3. Long press the Power Button to turn on the light. Default Mode: CCT
4. Long press the Power Button to turn o the light.
① APP Connection Status Icon
② Fan Status Icon
Quiet Mode. The fan keeps running at low speed for
minimum noise, and overheating protection will be
activated if the product temperature is higher than the
alarm value.
None grouping status. The product defaults to the factory
status, and will not be aected by other groups.
If the icon is always on, it means that Repeater function
is turned on, and if the icon disappears, it means the
function is turned o.
If the icon ashes, it means that the internal temperature
of the product is too high, and cooling measures need
to be taken. If the icon disappears, it means that the
operation is normal.
③ Group Status Icon
④ Repeater Status Icon
⑤ Product Overheated Alarm Icon
A stands for Group A. There are six groups (A~F). T
stands for Tx.
A stands for Group A. There are six groups (A~F). R
stands for Rx.
A stands for Group A. There are six groups (A~F). TR
stands for TxRx.
Brightness (0%-100%)
Color Temperature (2700K-6500K)
1. Short press Adjustment Dial to switch between brightness and color
temperature control.
CCT Mode (Short press CCT Mode Button to enter)
Brightness / Color Temperature Control:
Interface Introduction
2. Roll the Dial clockwise to increase value, and anticlockwise to decrease
value.
Rolling the Dial will enlarge the current setting parameter value, and it will
automatically return to the main screen after 1.5 seconds of no operation
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 2700K-6500K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: LOCK
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 2700K-6500K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: LOCK
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 2700K-6500K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 2700K-6500K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 2700K-6500K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 2700K-6500K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 2700K-6500K
RATE: LOCK
DIM: 0%-100%
CCT: 2700K-6500K
Fire
CCT Chase
Pulsing
TV
Explosion
Faulty Bulb
Welding
Strobe
Lightning
SOS
EFF
Rate
BrightnessSpecial Eect
Color Temperature
EFF Mode (Short press EFF Mode Button to enter)
Special Eect Switch: Short press EFF Mode Button
Interface Introduction
SET RATE EFF CCT
POWER
SET RATE EFF CCT
POWER
Termékspecifikációk
Márka: | COLBOR |
Kategória: | Megkönnyebbülés |
Modell: | CL100 |
Szüksége van segítségre?
Ha segítségre van szüksége COLBOR CL100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Megkönnyebbülés COLBOR
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
18 December 2024
Útmutatók Megkönnyebbülés
- Megkönnyebbülés ARRI
- Megkönnyebbülés Ledar
- Megkönnyebbülés Mellert SLT
- Megkönnyebbülés Kathrein
- Megkönnyebbülés Gardena
- Megkönnyebbülés NGS
- Megkönnyebbülés Reer
- Megkönnyebbülés Telefunken
- Megkönnyebbülés Heirt
- Megkönnyebbülés Delta Dore
- Megkönnyebbülés Black & Decker
- Megkönnyebbülés Century
- Megkönnyebbülés Kuzco
- Megkönnyebbülés Excello
- Megkönnyebbülés Vimar
Legújabb útmutatók Megkönnyebbülés
9 Április 2025
9 Április 2025
9 Április 2025
8 Április 2025
8 Április 2025
8 Április 2025
7 Április 2025
5 Április 2025
5 Április 2025
5 Április 2025