Használati útmutató Conceptronic EMRICK02G

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Conceptronic EMRICK02G (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/2
Multi Language Quick Guide
PCI Express Card 4-Port USB 3.0
EMRICK02G
ENGLISH
Conceptronic EMRICK02G
1. Package contents
4 ports serial PCI Express card
Product CD-ROM
This multi language quick guide
2. Installation & usage
3.
Turn Off the power to your computer.
Unplug the power cord and remove your computer’s cover.
Remove the slot bracket from an available PCIe slot.
To install the card, carefully align the card’s bus connector with the selected PCIe slot on
the motherboard. Push the board down firmly.
Replace the slot bracket’s holding screw to secure the card.
Replace the computer cover and reconnect the power cord.
Your computer will show the “New Hardware Wizard” on your screen. You can ignore this
“New Hardware Wizard” by clicking “Cancel”.
Insert the CD-ROM in the optical drive of your computer. The AutoPlay option will be
shown automatically. Click on “Run Autorun.exe” to start the autorun menu.
Select “Install Drivers” and follow the onscreen instructions to install the required drivers
for the serial PCIe card.
When the driver installation is complete, restart your computer to ensure the drivers are
correctly loaded.
* The PCI Express USB3.0 Card must be connected the SATA power cable to SATA power jack.

Termékspecifikációk

Márka: Conceptronic
Kategória: nincs kategorizálva
Modell: EMRICK02G

Szüksége van segítségre?

Ha segítségre van szüksége Conceptronic EMRICK02G, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek