Használati útmutató Cotech 51050X2

Cotech kapcsoló 51050X2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cotech 51050X2 (5 oldal) a kapcsoló kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 3.9 csillagra

Oldal 1/5
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
Ver. 20151021
Flush Mount Dimmer
Switch Receiver
Art.no 36-6031 Model 51050X2
Please read theentire instruction manual before using theproduct
and then save it for future reference. Wereserve theright for
any errors in text or images and any necessary changes made
to technicaldata. Intheevent of technical problems or other
queries, please contact our Customer Services.
Note:
Electrical installations should only be carried out by aqualified
electrician.
Installation
Pairing the receiver to a remote control
Wiring to a230V power supply Connecting alight
1. Hold in thebutton on
thefront of thereceiver for
at least 3 seconds and then
releaseit.
3. Single press one of theon-buttons on theremote control
(if it has more than one on-button). Thereceiver’s LED will
shine steadily once theremote control has been paired.
Upto 6 remote controls can be paired with thereceiver.
Dimming the light
Thelight can be dimmed using thepaired remote control.
Thisis how to doit:
Press theon-button on theremote control twice in quick
succession to cause thelight to alternately increase and
decrease. Single press theon-button once thedesired light
level has been reached.
Switching the light on/off
Switch thelight on/off using theon and off buttons. Thelight
comes on with thelatest light level setting when theon-button
is pressed. Ifyou wish to set anew light level once thelight is
switched on, press theon-button on theremote controlagain.
Single press theon-button once thedesired light level has
been reached.
Deleting a paired remote control
Up to 6 remote controls can be stored in thereceiver memory.
Ifyou wish to pair anadditional remote control when six
remote controls are already paired with thereceiver, you must
first delete one of theexisting remote controls:
1. Hold in thebutton on thefront of thereceiver you wish to
delete for 3 seconds and then releaseit.
2. TheLED button will startashing slowly. Thereceiver is
now ready to delete theremote control.
3. Press in theoff-button on theremote control (make sure
to choose thecorrect off-button if theremote control can
connect to multiple receivers). Theremote control will now
be deleted from thereceiver.
Deleting all paired remote controls
1. Hold in thebutton on thefront
of thereceiver for 6seconds
until theLED button starts
flashing quickly.
2. When theLED stops flashing,
all theremote controls which
were paired with thereceiver
will have been deleted.
2. TheLED button will start
flashing slowly. Thereceiver
is now ready to be paired
with aremote control.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by
incorrect waste disposal, theproduct must
be handed in for recycling so that thematerial
can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your
local collection facility or contact theplace of
purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Rated voltage 230V, 50 Hz
Frequency 433.92 MHz
Maxrange 25m
Max load
Incandescent and halogenbulbs Max 200W
Dimmable CFLbulbs Max 200W
Dimmable 230V LEDbulbs Max 3–24W

Termékspecifikációk

Márka: Cotech
Kategória: kapcsoló
Modell: 51050X2

Szüksége van segítségre?

Ha segítségre van szüksége Cotech 51050X2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek