Használati útmutató Cotech E0003HA-B3V-YX
Cotech
Időjárás állomás
E0003HA-B3V-YX
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cotech E0003HA-B3V-YX (6 oldal) a Időjárás állomás kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 10.5 felhasználó értékelte átlagosan 5.0 csillagra
Oldal 1/6
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
1
2
3
4
Ver. 20171211
Temperature Sensor
Art.no 36-6726 Model E0003HA-B3V-YX
36-6726-1 E0003HA-B3V-YX
Please read theentire instruction manual before using theproduct
and then save it for future reference. Wereserve theright for
any errors in text or images and any necessary changes made
to technicaldata. Intheevent of technical problems or other
queries, please contact our Customer Services.
Safety
• Thetemperature sensor must not be dismantled or
modified in anyway.
• Thebatteries should be removed from thetemperature sensor
if it is not to be used for anextended period, otherwise they
might leak and damage thesensor. Neverleave discharged
batteries in thebattery compartment.
• Do not expose thetemperature sensor to impacts.
NOTE:
Do not mix old and new batteries or batteries of
differenttypes.
Do not mix alkaline, regular or rechargeable batteries.
Care and maintenance
Clean theproduct using alightly moistenedcloth. Useonly
mild cleaning agents, neversolvents or corrosive chemicals.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by
incorrect waste disposal, theproduct must
be handed in for recycling so that thematerial
can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your
local collection facility or contact theplace of
purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Buttons and functions
1. LED indicator
(flashes
when data is
being sent to
thethermo meter
unit)
2. Wall bracket
3. Channel selector
4. Battery
compartment
Synchronising thesensor with aweather station/
thermometer (main unit)
1. Press and hold in [ CH/ ] on themain unit (sold separately) until ▲
thesignal icon begins toflash. Themain unit will begin searching for
theoutdoor sensor.
2. ] repeatedly until thedesired channel appears on Press [ CH/▲
thedisplay of themainunit.
- Choose CH 1 if channel 1 has been selected on thetemperature sensor.
- Choose CH 2 if channel 2 has been selected on thetemperature sensor.
- Choose CH 3 if channel 3 has been selected on thetemperature sensor.
3. After ashort moment, thereadings from thesensor will appear on
thedisplay of themainunit.
• Themain unit should receive data from thesensor and display the temperature
within 3 minutes of thebatteries having been inserted in both devices.
• Refer to theTroubleshooting section if there is aproblem.
Troubleshootingguide
Nothing
appears on
thedisplay of
themainunit.
• Check thebatteries in themain unit and sensor/s.
Temperature
from outdoor
sensor not
displayed.
• Check that thedistance between thethermometer
and sensor does not exceed 30m.
• Make sure that thedevices are located at least 2m
from monitors and TVsets.
• Avoid placing thedevices on or close to window
frames made ofmetal.
• Avoid using electronic devices such as loudspeakers
which operate at thesame frequency (433MHz),
close to thedevices.
• Check thebatteries in thethermometer and any
connected sensors.
• Remove thebatteries, wait awhile and then reinsertthem.
Displayed
temperature
is incorrect.
• Remove thebatteries, wait awhile and then reinsertthem.
• Make sure that thedevices are not affected by heat
sources or air-conditioning units andsuch.
Specifications
Installation
Batteries and channel selection
1. Slide thebattery cover downwards in thedirection of
thearrow to access thebattery compartment.
2. Insert 2×AAA/LR03 batteries (sold separately) observing
thepolarity markings in thebattery compartment.
3. Channel selection:
- Set thechannel selector to position 1 if only one sensor is
to be used with your thermometer/weather station.
- Set thechannel selector to position 2 if you are already
using one sensor with your thermometer/weather station.
- Set thechannel selector to position 3 if you are already
using two sensors with your thermometer/weather station.
4. Click thebattery cover back intoplace.
Placement
1. Place thesensor in alocation that is protected from direct
sunlight andrain.
2. Mount thesensor at least 2.5 m above ground, if possible.
3. Screw ascrew into asuitable mounting surface and hang
thesensor on it using thewall bracket (2). Batteries 2×AAA/LR03
(sold separately)
Update interval 60seconds
Frequency 433MHz
Range 30m
Size 38×100×18mm
Weight 30g
Termékspecifikációk
| Márka: | Cotech |
| Kategória: | Időjárás állomás |
| Modell: | E0003HA-B3V-YX |
Szüksége van segítségre?
Ha segítségre van szüksége Cotech E0003HA-B3V-YX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Időjárás állomás Cotech
12 Augusztus 2024
3 Augusztus 2024
31 Július 2024
21 Július 2024
Útmutatók Időjárás állomás
- Trevi
- Hyundai
- Oregon Scientific
- UPM
- Rebel
- PCE Instruments
- Lowrance
- EVE
- Techno Line
- OBH Nordica
- Cresta
- Tanita
- Marquant
- Dexford
- Blaupunkt
Legújabb útmutatók Időjárás állomás
31 Március 2025
27 Március 2025
27 Március 2025
14 Január 2025
13 Január 2025
13 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
11 Január 2025