Használati útmutató Cotech HD2200

Cotech Dimmer HD2200

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cotech HD2200 (5 oldal) a Dimmer kategóriában. Ezt az útmutatót 29 ember találta hasznosnak és 15 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
GREAT BRITAIN CUSTOMER SERVICE
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mail internet postal
Ver. 20170614
Wall Box Dimmer Module
Art.no 36-6592 Model Hytronik HD2200
Please read theentire instruction manual before using
theproduct and then save it for future reference.
Wereserve theright for any errors in text or images
and any necessary changes made to technicaldata.
Intheevent of technical problems or other queries,
please contact our Customer Services.
Installation
Note:
This product must only be installed by aqualified
electrician.
Push-button switch spring sold separately.
Wiring diagram
If theconnected light was switched on when
thepower was cut, thelight will come back on at
thesame light level as before.
If theconnected light was switched off when
thepower was cut, thelight will remain off when
thepower is restored.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm
to theenvironment or health hazards caused
by incorrect waste disposal, theproduct
must be handed in for recycling so that
thematerial can be disposed of in aresponsible
manner. Whenrecycling your product, take it to your
local collection facility or contact theplace of purchase.
Theywill ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Rated voltage 230V AC, 50/60 Hz
Load halogen/LED 1–200W/1–150W
Power factor ≥ 0.97
Operating temperature −20 to 45 °C
Fuse Automaticreset
Overheating protection Automaticreset
IP rating IP20
Size (mm)
Installation with aspring-
loaded on/off switch
Thanks to their built-in synchronisation feature, multiple
(up to 50) wall box dimmers can be controlled by thesame
spring-loaded on/off switch without theneed for separate
synchronisation between thewall box dimmers.
Synchronisation
1. Press and hold in theon/off switch for at least
1second and then release it, then quick-press (for
less than 1 second) theswitchagain. Alldimmer
modules will be switchedoff.
2. Press in theswitch again, hold in for at least
1second and then release. Theswitch modules will
now be synchronised.
Potentiometer
Installation with multiple
dimmers and spring-loaded
on/off switch
Potentiometer for adjusting
thelowest dimmer level
depending on theload.
Operating instructions
Switch light on/off: quick-press theswitch. Thelight
will come on with thesame intensity as when it was
lastused.
Stepless dimming: hold theswitchin. Everytime
theswitch is held in, thedimmer changes function
and alternates between raising and lowering
thelightlevel.
Memory
Thedimmer remembers thelatest dimmer level setting
after aloss of power (power cut or blown fuse):

Termékspecifikációk

Márka: Cotech
Kategória: Dimmer
Modell: HD2200

Szüksége van segítségre?

Ha segítségre van szüksége Cotech HD2200, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek