Használati útmutató Crestron DMPS3-4K-100-C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Crestron DMPS3-4K-100-C (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.4 csillagra

DOGUIDE

DMPS3-4K-50 Rear Panel Connections

DMPS3-4K-100-C Rear Panel Connections

Information about VGA, DM OUT, AUDIO OUT, LAN, and NET pin assignments follows.

DMPS3-4K-50/DMPS3-4K-100-C

3-Series® 4K DigitalMedia™ Presentation Systems

DO Install the Device

The Crestron® DMPS3-4K-50 and DMPS3-4K-100-C can be mounted into a rack, mounted under a table, or placed onto a at surface.

Mount into a Rack

The DMPS3-4K-50 and DMPS3-4K-100-C each occupy 1U of rack space. Using a #1 or #2 Phillips screwdriver, attach the two included rack ears to the

device. Then, mount the device into the rack using four mounting screws (not included).

Mount under a Table

Using a #1 or #2 Phillips screwdriver, attach the four included table mount brackets to the device. Then, attach the four table mount brackets to the underside

of the table using four mounting screws (not included).

Place onto a Flat Surface

When placing the device onto a at surface or stacking it with other equipment, attach the included feet near the corners on the underside of the device.

DO Connect the Device

Make connections to the rear panel of the device. Refer to the following illustrations for information about DMPS3-4K-50 and DMPS3-4K-100-C connections.

DO Check the Box

QUANTITYPRODUCTCOLORPART NUMBER

2Bracket, Rack Ear, 1U2032122

4Bracket, Under Table Mount2041951

1Connector, 4-Pin2003576

2Connector, 5-Pin2003577

1Emitter Probe, IR, Crestron® STIRP2001137

4Foot, 0.5" x 0.5" x 0.23", Rubber2002389Black

1Power Cord, 6' 7" (2 m)2001134

DMPS3-4K-100-C Only

1Connector, 3-Pin2003575

Ground

MIC IN:

From

microphone

AUDIO OUT:

To balanced/

unbalanced

stereo line

level audio

output device

IR OUT:

To Crestron

STIRP IR

emitter probe

(included)

COM:

To

RS-232

device

USB 1–4:

To Crestron

TT-100 series

presentation

interfaces

NET:

To Cresnet

device

DM OUT:

To DM 8G+®

receiver or other

DM® device or to

HDBaseT®device*

LAN:

10BASE-T/100BASE-TX

Ethernet to LAN100-240V~1.4A

50/60 Hz:

From ac

power outlet

VGA 1–4:

From RGB (VGA),

component, S-video, or

composite video sources

AUDIO 1–4:

From unbalanced

stereo line level

analog audio sources

HDMI 1–4:

From HDMI

audio/video

sources

HDMI OUT:

To HDMI

display

VGA 1–4:

From RGB (VGA),

component, S-video, or

composite video sources

AUDIO 1–4:

From unbalanced

stereo line level

analog audio sources

HDMI 1–4:

From HDMI®

audio/video

sources

HDMI OUT:

To HDMI

display

AUDIO OUT:

To balanced/

unbalanced

stereo line

level audio

output device

IR OUT:

To Crestron

STIRP IR

emitter probe

(included)

COM:

To

RS-232

device

Ground

LAN:

10BASE-T/100BASE-TX

Ethernet to LAN

USB 1–4:

To Crestron

TT-100 series

presentation

interfaces

NET:

To Cresnet®

device

100-240V~1.4A

50/60 Hz:

From ac

power outlet

Termékspecifikációk