Használati útmutató Crestron HDI-XSPA
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Crestron HDI-XSPA (2 oldal) a Vevő kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 5.0 csillagra
Oldal 1/2

DO GUIDE
HD(I)-XSPA
4K Ultra High-Denition 7.1 Surround Sound AV Receiver
DO Install the Device
The HD(I)-XSPA can be mounted in a rack or stacked with
other equipment. Two “ears” are provided so that the unit
can be rack mounted. These ears must be installed prior
to mounting. The only tool required is a #1 or #2 Phillips
screwdriver.
WARNING: To prevent bodily injury when mounting or
servicing this unit in a rack, observe the following guidelines:
• When mounting this unit in a partially lled rack, load
the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the
stabilizers before mounting or servicing the unit in the
rack.
CAUTION: To prevent equipment damage, use only the rack
ears Crestron® provides for this device.
NOTE: If rack mounting is not required, remove the feet from
the bottom of the unit with a screwdriver.
DO Make Connections to the Device
Make the necessary connections to the device as called out
in the diagram to the right. Connect the power last.
CAUTION: Keep the device unplugged until all of the input,
network, and speaker wiring is complete.
CAUTION: Check the speaker wires for shorts and frayed
wiring around the SPEAKER OUTPUTS connectors.
NOTE: The DM and LAN ports are for intra-building use only
and should not be connected to lines that run outside of the
building in which the unit is located.
NOTE: If the DM port is connected to a DM® switch, the LAN
port should not be connected to the local area network.
Additionally, the DM switch
can be used to congure the
network settings. Refer to
the DigitalMedia™ Design
Guide (Doc. 4546) at
www.crestron.com/manuals
for details.
NOTE: Ensure the unit is
properly grounded by con-
necting the chassis ground
lug to an earth ground
(building steel).
One balanced/unbalanced audio input is provided, utilizing a 5-pin terminal block connector. Refer to the following diagrams for
connecting a source.
DO Congure the Device
While the HD(I)-XSPA can be used right out of the box, the device can be
further customized with Crestron Toolbox™ or the front panel controls.
For details on using Crestron Toolbox, refer to the Crestron Toolbox help
le. For details on using the front panel controls, refer to the HD-XSPA
supplemental guide (Doc. 7448) at www.crestron.com/manuals.
DO Check the Box
QTY PRODUCT PART NUM.
2 Bracket, Rack Ear, 2U 2034434
8 Connector, 2-Pin 2012361
1 Connector, 4-Pin 2003576
3 Connector, 5-Pin 2003577
1 Connector, 8-Pin 2003580
1 Cable, USB 2.0, A - B, 6’ (1.83 m) 2014966
Items for HD-XSPA
1 Power Cord, 6' 7" (2 m) 4512528
1 Fuse, 10.0 A, Time Lag, 1.25" x 0.25", Ceramic Cartridge, 250 V 2017577
Items for HDI-XSPA
1 Varies by countryPower Cord
1 Fuse, 5.0 A, Time Lag, 5 x 20 mm, Ceramic Cartridge, 250 V 2017578
Wiring for Balanced Input
Right
Left
Shield
Wiring for Unbalanced Input
Right
Left
Jumpers
+
L R
+ - + -G
+
+
L R
+ - + -G
+
USB:
To HID-Compliant Keyboard or
Mouse
AUDIO IN (DIGITAL):
From Digital Audio Sources AUDIO IN (ANALOG):
From Analog Audio Sources
PREAMP OUT:
To Audio
Amplier
Ground
SPEAKER OUTPUTS:
To Speakers POWER:
From Line Voltage
DM:
From DigitalMedia Source
HDMI® IN:
From HDMI
Sources HDMI OUT:
To
HDMI Device
COM:
To
RS-232 Device RELAY:
To Controllable Device
SENS:
From Sensors
LAN:
10BASE-T/100BASE-TX Ethernet to
LAN
IR:
To IR Controlled Devices
Termékspecifikációk
| Márka: | Crestron |
| Kategória: | Vevő |
| Modell: | HDI-XSPA |
Szüksége van segítségre?
Ha segítségre van szüksége Crestron HDI-XSPA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Vevő Crestron
21 Augusztus 2024
21 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
19 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
18 Augusztus 2024
Útmutatók Vevő
- Vevő Luxman
- Vevő Manhattan
- Vevő Redline
- Vevő PSB
- Vevő Leema
- Vevő Wireless Solution
- Vevő James
- Vevő Datapath
- Vevő KanexPro
- Vevő Denver
- Vevő Jolida
- Vevő Audizio
- Vevő Whistler
- Vevő Marshall
- Vevő Ram Audio
Legújabb útmutatók Vevő
9 Április 2025
9 Április 2025
5 Április 2025
5 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
31 Március 2025
31 Március 2025
30 Március 2025