Használati útmutató QSC SPA-Qf 60x2

QSC Vevő SPA-Qf 60x2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót QSC SPA-Qf 60x2 (7 oldal) a Vevő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/7
Hardware User Manual
Q-SYS SPA-Qf Series Network Amplifiers
TD-001669-01-A
*TD-001669-01*
SPA-Qf 60x2
2-Channel Amplifier with FlexIO
SPA-Qf 60x4
4-Channel Amplifier with FlexIO
2
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.
equipment damage to equipment that may not be covered under the warranty.
The term “IMPORTANT” indicates instructions or information that are vital to the successful completion of theprocedure.
The term “ ” indicates additional useful information.NOTE
The lightning flash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may constitute a risk of electric shock to humans.
The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this
manual.
IMPORTANT SAFETY INSTRUCTIONS
WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the ambient operating temperature
of the rack environment may be greater than room ambient. Ensure that the maximum allowed operating temperature is
not exceeded – see the "Environmental" on page 3.
– Installation of the equipment in a rack should be such that the amount of air flow required for safe Reduced Air Flow
operation of the equipment is not compromised.
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Clean only with a dry cloth.
4. Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
5. Only use attachments/accessories specified by the manufacturer.
6. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
7. Do not submerge or use this apparatus in or near water or liquids.
8. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
9. Adhere to all applicable, local codes.
10. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
11. To reduce the risk of electric shock, power cord shall be connected to a mains socket with a protective earthing connection.
12. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where the
power cord exits from the apparatus.
13. The appliance coupler, or the AC mains plug, is the AC mains disconnect device and shall remain readily accessible after
installation.
14. Keep the ventilation opening free of dust or other matter.
15. Do not block any ventilation opening.
16. Install in accordance with the manufacturer’s instructions.
3
Maintenance and Repair
WARNING: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted
maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation
of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service
station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from
any failure of the customer, owner or user of the apparatus to facilitate those repairs.
Cleaning
WARNING: Liquids entering the housing may damage the internal electronics. Keep liquids away and do not use any
solvents or chemicals to clean this product. Clean only with a soft, slightly damp or dry cloth.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Environmental
Expected Product Life Cycle: 20 years
Normal Ambient Operating Temperature Range: -10°C to 35°C
Storage Temperature Range: -20°C to 60°C
Relative Humidity: 5 to 85% RH, non-condensing
Reduced amplifier output can be expected when the ambient temperature exceeds 35°C. Amplifier will shut NOTE:
down when the hardware temperature exceeds 73°C.
NOTE: Q-SYS SPA-Qf amplifiers are convection-cooled and therefore can become warm to the touch. This is normal and
expected.
Specifications and Dimensions
Product specifications and dimension drawings for SPA-Qf Series amplifiers can be found online at .qsys.com

Termékspecifikációk

Márka: QSC
Kategória: Vevő
Modell: SPA-Qf 60x2

Szüksége van segítségre?

Ha segítségre van szüksége QSC SPA-Qf 60x2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek