Használati útmutató Crestron TSR-302-BTP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Crestron TSR-302-BTP (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.5 csillagra

DOGUIDE

DO Check the Box

QTYPRODUCTPART NUM.

1TSR-302-BTP Battery Pack for TSR-3022039523

3. Lift the old TSR-302-BTP out of the battery compartment, as shown in the following

photograph.

DO Install the New Battery

After completing the removal of the old TSR-302-BTP from the touch screen remote, perform

the following procedure to install the TSR302-BTP in a TSR-302:

1. Place the TSR-302-BTP in the battery compartment, oriented as in the previous

photograph.

2. Reattach the battery compartment cover by pressing down lightly on the locking tab while

sliding the cover into place.

DO Charge the Battery

Install the TSR-302-BTP in the TSR-302 touch screen remote and mount it in an ac-powered

TSR-302-DS Table Dock.

TSR-302-BTP

Battery Pack for TSR-302

DO Remove the Battery

To remove the existing TSR-302-BTP from a TSR-302, perform the following procedure:

1. Remove the battery compartment cover on the rear of the TSR-302 by using two thumbs

and gently pressing in the direction of the arrow shown in the following photograph.

2. Place the touch screen remote on a clean, soft surface, with the screen side down.

Termékspecifikációk