Használati útmutató CRUX RVCTY-71D

CRUX tolatókamera RVCTY-71D

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX RVCTY-71D (3 oldal) a tolatókamera kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/3
- Plug and play connector for easy installation.
- Parking guide lines with On-Off feature.
- Mirror image capability for top mount of lip mount installation.
- Adjustable UP-DOWN camera lens angle.
TOYOTA
2012 – 2013 Tundra
INSTALLING THE CAMERA AND CABLE
1. Remove the tailgate cover.
2. On the right side of the tailgate handle, drill a hole using the hole saw provided.
3. Route the camera cable through the hole and secure the camera to the handle.
4. Connect the 4-Pin plug to the provided factory plug underneath the truck (near the spare tire) as the
cable is pre-ran for the camera from the factory.
5. Put the gear in reverse to test the camera.
6. Re-install the tailgate cover.
Rev.031417
1
4-Pin Connector near
the spare tire

Termékspecifikációk

Márka: CRUX
Kategória: tolatókamera
Modell: RVCTY-71D

Szüksége van segítségre?

Ha segítségre van szüksége CRUX RVCTY-71D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek