Használati útmutató Cuisinart DLC2011SE

Cuisinart Konyhai robotgép DLC2011SE

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cuisinart DLC2011SE (68 oldal) a Konyhai robotgép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/68

Instruction Booklet Premier™11-Cup Series

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

Recommended work bowl capacity for various foods

FOOD CAPACITY

Chopped Fruits and 11 cups processed food

Vegetables

Chopped or Puréed 1-3/4 pounds meat, cut in 1-inch or smaller

Meat, Poultry, Fish or cubes, chilled

Seafood

Bread Dough 5 cups all-purpose flour yielding two 1-1/4

pound loaves

2-1/2 cups each all-purpose and whole wheat flour,

yielding two 1-1/4 pound loaves

2-3/4 cups whole grain flours (no white flour added)

for custom recipes

Pizza Dough 4-1/2 cups all-purpose flour,

yielding 2-1/2 pounds pizza dough

(dough to make up to four 12 – 14-inch pizzas)

Nuts for Nut Butters 2 – 4 cups nuts (10 – 20 ounces)

Sliced or Shredded Cheese, 11 cups (total processed weight varies by food)

Fruit, or Vegetables

Cake Batter 1 18.5 ounce standard packaged cake mix, or

homemade batter recipe for four 8-inch layers

Thin Liquids (such as custard 2-3/4 cups

for quiche or cheesecake batter)

Thick Liquids 5 – 6 cups

Puréed Cooked Fruits 8 cups cooked, yielding approximately 5-1/2 to

And Vegetables 6 cups thick purée

Puréed Soft Fresh Fruits 8 cups fresh, yielding approximately 5 to

(berries, kiwis, peaches, etc.) 6 cups purée

IMPORTANT

UNPACKING

INSTRUCTIONS

This package contains a

Cuisinart®Premier™Series

Food Processor, and the

standard parts for it:

PowerPrep®metal dough

blade, metal chopping

blade, slicing disc,

shredding disc, detachable

stem for discs, spatula,

recipe and instruction

books, and how-to video.

CAUTION:

THE CUTTING TOOLS

HAVE VERY SHARP

EDGES. To avoid injury

when unpacking the

parts, please follow

these instructions:

1. Place the box on a low

table or on the floor

next to the kitchen

counter or table where

you intend to keep the

food processor. Be

sure the box is right

side up.

2. Open top flaps and

remove the cardboard

insert. You will see a

rectangular block of

plastic foam that holds

the processor parts,

each fitted into a cavity

of the foam.

3. The PowerPrep®

metal dough blade (A)

and detachable stem

for the discs (B) are in

cavities on one short

side of the foam block.

Remove them first.

4. The plastic spatula (C)

is on the adjacent long

side of the foam block.

Remove it next.

5. The slicing disc (D)

is on the edge of one

of the long sides of

the foam block; the

shredding disc (E)

is on the other side.

Slide them out of their

grooves WITH GREAT

CARE; THE BLADES

ARE VERY SHARP.

6. Only the work bowl

cover (F) and pusher

assembly (G) now

remain in the foam

block. Grasp an edge

of the work bowl cover

and pull it straight up.

The pusher assembly

will slide away from the

work bowl cover and

remain in place. Lift it

straight up to remove.

7. Lift out the foam block.

8. Remove the instruction

book.

9. Lift out the video

from its space in the

cardboard frame on

one side of the box.

Then lift out the

cardboard frame.

10. The housing base and

work bowl with metal

blade are at the bottom

of the box. The metal

blade is loose in the

work bowl. Do not turn

over work bowl without

first removing metal

blade.

11. Remove the base

and bowl together

by grasping the plastic

bowl at the top with

both hands and lifting

the bowl straight up.

Do not rotate the bowl

clockwise on the base.

This will cause the

bowl to separate from

the base.

12. Place the food

processor on a

counter or table and

read the instructions

thoroughly before using

the machine.

13. Save the shipping

cartons and plastic

foam blocks. You may

want to use them at a

later date.

Please watch the

enclosed how-to video

before using the food

processor.

NOTE: Remember to

return your completed

warranty card with all

information carefully

filled out.

WHEN

REMOVING BLADE:

CAREFULLY REMOVE

THE METAL BLADE BY

GRASPING THE

CENTER WHITE HUB

AND LIFTING IT

STRAIGHT UP.

NEVER TOUCH THE

BLADES, AS THEY

ARE RAZOR SHARP.

Termékspecifikációk

Márka:	Cuisinart
Kategória:	Konyhai robotgép
Modell:	DLC2011SE

Szüksége van segítségre?

Ha segítségre van szüksége Cuisinart DLC2011SE, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Konyhai robotgép Cuisinart

Cuisinart FP-14DC Útmutató

12 Január 2025

Cuisinart Mini-Prep Plus DLC-2AFR Útmutató

12 Január 2025

Cuisinart Core Custom MFP-WB4 Útmutató

8 Január 2025

Cuisinart CCH-3 Útmutató

2 Szeptember 2024

Cuisinart Core Custom MFD-4 Útmutató

30 Augusztus 2024

Cuisinart Continuous Feed CFA-10 Útmutató

25 Augusztus 2024

Cuisinart FP-7 Útmutató

22 Augusztus 2024

Cuisinart FP-9 Útmutató

22 Augusztus 2024

Cuisinart CBT700E Útmutató

18 Augusztus 2024

Cuisinart DFP-14CPY Útmutató

18 Augusztus 2024

Útmutatók Konyhai robotgép

Legújabb útmutatók Konyhai robotgép

Costway EP24647 Útmutató

4 Április 2025

Concept SM3382 Útmutató

31 Március 2025

Reber 9508 N Útmutató

30 Március 2025

Reber 9500 N Útmutató

30 Március 2025

Reber 8683 N Útmutató

30 Március 2025

Ninja BN650UK Útmutató

27 Március 2025

KitchenAid 5KFP0921 Útmutató

27 Március 2025

TriStar MX-4804 Útmutató

15 Január 2025

Create CHEF CHOP Útmutató

15 Január 2025

Bredeco BCPM-1200-EXP Útmutató

15 Január 2025