Használati útmutató CyberData Systems 011324

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CyberData Systems 011324 (3 oldal) a Vevő kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/3
Quick Start Guide 931155B
The IP Endpoint Company
1.0 Out-of-Box and Prior to Final Installation
1.1. Verify that you have received all of the parts listed on the Installation Quick
Reference placemat.
1.2. Download the current manual, otherwise known as an Operations Guide,
which is available in the Downloads tab at the following webpage:
https://www.cyberdata.net/products/011324/
Note You can also navigate to the Downloads tab by going to
www.CyberData.net
and following the steps that are indicated by
the following figures:
2.0 Select Power Source
IEEE 802.3af or 802.3at PoE Switch IEEE 802.3af or 802.3at PoE Injector
Set PoE power type to Class 0 = 15.4W
OR
for high power PoE+ set Class 4 = 30W
CAT6 cable recommended—
for longer distances
Be sure you are using a non-PoE switch or port
Make sure port is not in trunk mode
Set port to full duplex/ 100mbps
Spanning Tree Protocol (STP) must be disabled or Portfast enabled
1
3
4
2
SIP
OUR PRODUCTS
VOIP PRODUCTS
A
B
011324 SIP PAGING AMPLIFIER
Downloads
SIP Paging Amplifier
Quick Start Guide

Termékspecifikációk

Márka: CyberData Systems
Kategória: Vevő
Modell: 011324

Szüksége van segítségre?

Ha segítségre van szüksége CyberData Systems 011324, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek